SPPU BE Civil syllabus

SPPU · Final Year Civil Engineering · 2019 Pattern

Foundation Engineering

401001 · Semester VII · 3 credits · In-semester 30 + end-semester 70

  1. Unit 1: Subsurface Investigations for Foundations

    6 hours

    Planning subsurface exploration; trial pits, borings, number and depth of holes; core recovery, RQD and core logs; seismic refraction and electrical resistivity; disturbed and undisturbed sampling and samplers; SPT and its corrections, DCPT, SCPT and the pressuremeter; bore logs and the soil investigation report.

    Marks: 15 in the in-semester exam

    • Planning subsurface exploration
    • Boring, sampling and samplers
    • Geophysical exploration methods
    • SPT and its corrections
    • Cone penetration and pressuremeter tests
    • Soil investigation report
  2. Unit 2: Bearing Capacity

    6 hours

    Modes of shear failure; Terzaghi, Hansen, Meyerhof, Skempton, Vesic and IS methods for strip, rectangular and circular footings; plate load test and SPT; Housel's perimeter shear concept; layered soils, water table and eccentricity; presumptive bearing capacity.

    Marks: 15 in the in-semester exam

    • Terzaghi's bearing capacity theory
    • Meyerhof, Hansen, Vesic and IS methods
    • Plate load test
    • Housel's perimeter shear concept
    • Layered soils, water table and eccentricity
    • Presumptive bearing capacity
  3. Unit 3: Immediate and Consolidation Settlement

    6 hours

    Causes and components of settlement; pressure bulb, contact pressure and significant depth; allowable and differential settlement to IS; settlement from plate load and SPT; Terzaghi's consolidation theory and the oedometer test; coefficient of consolidation by square-root and log-time fitting; rate of settlement; normal and over-consolidation.

    Marks: 17–18 in the end-semester exam

    • Immediate settlement
    • Allowable and differential settlement
    • Terzaghi's consolidation theory
    • Coefficient of consolidation
    • Normally and over-consolidated clays
  4. Unit 4: Pile Foundations

    6 hours

    Classification and installation of piles; static capacity; ENR, modified ENR and Hiley formulae; pile load and cyclic load tests; group action by the Feld rule and block method; negative skin friction; settlement of pile groups in clay; uplift capacity; micropiles.

    Marks: 17–18 in the end-semester exam

    • Classification and installation of piles
    • Static capacity of piles
    • Dynamic pile formulae
    • Pile load tests
    • Pile groups and negative skin friction
    • Uplift capacity of piles and micropiles
  5. Unit 5: Shallow Foundations, Piers and Caissons

    6 hours

    Types, location and depth of footings; proportioning combined rectangular, trapezoidal and strap footings; raft types, floating rafts and rigid and flexible design principles; piers and caissons; well foundations: components, sinking, tilts and shifts, bearing capacity, forces and lateral stability by Terzaghi's and IRC methods.

    Marks: 17–18 in the end-semester exam

    • Proportioning of combined and strap footings
    • Raft foundations
    • Piers and caissons
    • Well foundations: components and sinking
    • Tilts and shifts in wells
    • Lateral stability of well foundations
  6. Unit 6: Cofferdams and Foundations on Black Cotton Soils

    6 hours

    Types of cofferdams; contiguous pile walls and RC diaphragm walls; black cotton soil, swelling potential and swelling pressure; foundations on expansive soil; under-reamed piles; stone columns; preloading with vertical drains.

    Marks: 17–18 in the end-semester exam

    • Cofferdams
    • Diaphragm walls and contiguous pile walls
    • Swelling of black cotton soils
    • Foundations on expansive soils
    • Under-reamed piles
    • Stone columns and vertical drains

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.