SPPU BE Civil syllabus

SPPU · Final Year Civil Engineering · 2019 Pattern

Formwork and Plumbing Engineering

401004F · Elective IV · Semester VII · 3 credits · In-semester 30 + end-semester 70

One of the Elective IV options.

All notes for this subject
  1. Unit 1: Introduction to Formwork

    6 hours

    Formwork as a temporary structure; requirements, selection and types; timber, plywood and steel; aluminium, plastic and FRP formwork; accessories; economy and planning.

    Marks: 15 in the in-semester exam

    • Types and materials of formwork
    • Economy and planning of formwork
  2. Unit 2: Formwork Analysis

    6 hours

    Forms for walls, beams, columns and slabs; dead and live loads; lateral pressure of fresh concrete to IS 14687 and the factors affecting it; allowable stresses and deflection limits; common design deficiencies.

    Marks: 15 in the in-semester exam

    • Loads on formwork
    • Lateral pressure of fresh concrete
    • Formwork design criteria
  3. Unit 3: Formwork Design

    6 hours

    Design concepts for slab, beam, column and footing formwork; design of slab and wall formwork.

    Marks: 17–18 in the end-semester exam

    • Design of slab formwork
    • Design of wall and column formwork
  4. Unit 4: Introduction to Plumbing

    6 hours

    Water-borne disease and premise plumbing; plumbing codes and institutions; sustainable plumbing; roles of plumbing designers and plumbers; future challenges.

    Marks: 17–18 in the end-semester exam

    • Importance of premise plumbing
    • Plumbing codes and sustainable practice
  5. Unit 5: Plumbing Hydraulics and Components

    6 hours

    Friction and minor losses; fixtures and water-efficient fixtures; pipes, fittings, valves and traps; equivalent lengths; water demand of buildings; water supply and drainage systems in buildings.

    Marks: 17–18 in the end-semester exam

    • Friction and minor losses in pipes
    • Plumbing fixtures, valves and traps
    • Water demand of buildings
    • Building water supply and drainage systems
  6. Unit 6: Plumbing System Design

    6 hours

    Code limits on pressure and velocity; simultaneous demand; pipe sizing methods; fixture units for supply and drainage; sizing for a three-storey building by the segmented loss method; toilet layouts and plumbing plans.

    Marks: 17–18 in the end-semester exam

    • Simultaneous demand and fixture units
    • Pipe sizing in buildings
    • Plumbing layouts and plans

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.