SPPU BE Civil syllabus

SPPU · Final Year Civil Engineering · 2019 Pattern

Dams and Hydraulic Structures

401011 · Semester VIII · 3 credits · In-semester 30 + end-semester 70

  1. Unit 1: Introduction to Dams

    6 hours

    History and terms; site selection; classification of dams by purpose, material, size, hydraulic and structural action; arch and buttress dams; dam safety and instrumentation: piezometers, settlement cells, inclinometers, pendulums, strain gauges and seismographs.

    Marks: 15 in the in-semester exam

    • Classification of dams
    • Selection of dam site and type
    • Arch and buttress dams
    • Dam instrumentation
  2. Unit 2: Gravity Dams

    6 hours

    Forces and load combinations; seismic forces by Zangar's method; stress analysis, principal stresses and the middle-third rule; failure modes; elementary and practical profiles; high and low dams; construction, RCC dams, temperature control, cracks, joints and seals.

    Marks: 15 in the in-semester exam

    • Forces on gravity dams
    • Seismic forces on dams
    • Stability and modes of failure
    • Elementary profile of a gravity dam
    • Construction of gravity dams
  3. Unit 3: Spillways

    6 hours

    Spillway capacity and components; classification by operation, gates and features; ogee spillway design and crest profile; energy dissipation; stilling basins and IS stilling basins; jump height and tail water; roller and ski-jump buckets; spillway gates.

    Marks: 17–18 in the end-semester exam

    • Types of spillways
    • Design of ogee spillway
    • Energy dissipation and stilling basins
    • Bucket-type energy dissipators
  4. Unit 4: Earth Dams

    6 hours

    Types and components; design criteria; phreatic line and seepage by flow nets for homogeneous and zoned dams; forces and stability by the Swedish slip circle; failures; seepage control; construction.

    Marks: 17–18 in the end-semester exam

    • Types and components of earth dams
    • Phreatic line and seepage
    • Stability by the Swedish slip circle
    • Failures of earth dams
    • Seepage control
  5. Unit 5: Canals

    6 hours

    Classification and components of canals; alignment; stable channel design by Kennedy's and Lacey's theories; lined canal design and lining; falls, outlets, escapes and regulators.

    Marks: 17–18 in the end-semester exam

    • Classification of canals
    • Kennedy's theory
    • Lacey's regime theory
    • Canal lining
    • Canal structures
  6. Unit 6: Diversion Headworks and Cross-drainage Works

    6 hours

    Components of headworks; weirs on permeable foundations; Bligh's, Lane's and Khosla's theories; cross-drainage works: aqueducts, siphon aqueducts, super-passages, level crossings and their design considerations.

    Marks: 17–18 in the end-semester exam

    • Diversion headworks
    • Bligh's and Lane's theories
    • Khosla's theory
    • Cross-drainage works

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.