SPPU BE Civil syllabus

SPPU · Final Year Civil Engineering · 2019 Pattern

Advanced Design of Steel Structures

401004B · Elective IV · Semester VII · 3 credits · In-semester 30 + end-semester 70

One of the Elective IV options.

  1. Unit 1: Members under Combined Forces

    6 hours

    Combined shear and bending; sections under high shear; combined axial force and bending; section and member strength; design of beam-columns.

    Marks: 15 in the in-semester exam

    • Combined shear and bending
    • Sections under high shear
    • Combined axial force and bending
    • Design of beam-columns
  2. Unit 2: Moment-resisting Connections

    6 hours

    Types of connections; moment-resisting beam-to-beam and beam-to-column connections; bolted and welded web and flange splices.

    Marks: 15 in the in-semester exam

    • Types of steel connections
    • Moment-resisting connections
    • Beam splices
  3. Unit 3: Cold-formed Light-gauge Sections

    6 hours

    Advantages and cross-sections; stiffened and unstiffened elements; flat-width ratio and effective width; design of compression, tension and flexural members.

    Marks: 17–18 in the end-semester exam

    • Cold-formed sections and effective width
    • Cold-formed compression and tension members
    • Cold-formed flexural members
  4. Unit 4: Tubular Structures

    6 hours

    Design of tubular trusses and scaffolding with circular and rectangular hollow sections; detailing and design of joints.

    Marks: 17–18 in the end-semester exam

    • Design of tubular trusses
    • Tubular scaffolding
    • Tubular joints
  5. Unit 5: Castellated Beams

    6 hours

    Fabrication from rolled sections; advantages; failure modes; design for bending and shear by the limit state method.

    Marks: 17–18 in the end-semester exam

    • Castellated beams
    • Design of castellated beams for bending and shear
  6. Unit 6: Portal and Gable Frames

    6 hours

    Plastic analysis of portal and gable frames; limit state design of portal and gable frames.

    Marks: 17–18 in the end-semester exam

    • Plastic analysis of portal frames
    • Design of gable frames

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.