SPPU BE Civil syllabus

SPPU · Final Year Civil Engineering · 2019 Pattern

Advanced Design of Concrete Structures

401003B · Elective III · Semester VII · 3 credits · In-semester 30 + end-semester 70

One of the Elective III options.

  1. Unit 1: Flat Slabs

    6 hours

    Types of flat slabs; proportioning; design moments by the direct design method and their distribution; design of interior and end panels; detailing.

    Marks: 15 in the in-semester exam

    • Flat slab types and proportioning
    • Direct design method
    • Design of interior and end panels
  2. Unit 2: Yield Line Analysis of Slabs

    6 hours

    Yield line theory and assumptions; yield line patterns; equilibrium and virtual work methods; rectangular, triangular and circular slabs with various edge and load conditions.

    Marks: 15 in the in-semester exam

    • Yield line theory
    • Virtual work method
    • Yield line analysis of rectangular slabs
    • Yield line analysis of circular and triangular slabs
  3. Unit 3: Earth Retaining Structures

    6 hours

    Types of retaining walls; backfill conditions; design of cantilever retaining walls for different backfills.

    Marks: 17–18 in the end-semester exam

    • Types of retaining walls
    • Design of cantilever retaining walls
  4. Unit 4: Liquid Retaining Structures

    6 hours

    Types of water tanks; IS 3370 provisions; approximate and IS code methods; design of circular and rectangular tanks resting on ground.

    Marks: 17–18 in the end-semester exam

    • IS code provisions for water tanks
    • Design of circular water tanks
    • Design of rectangular water tanks
  5. Unit 5: Shear Walls and Ductile Detailing

    6 hours

    Functions and types of shear walls; code provisions; design of shear walls for lateral loads; ductile detailing.

    Marks: 17–18 in the end-semester exam

    • Types of shear walls
    • Design of shear walls
    • Ductile detailing to IS 13920
  6. Unit 6: Analysis and Design of RC Frames

    6 hours

    Seismic coefficient method; substitute frame analysis; frames under combined gravity and lateral loads; design of frame members.

    Marks: 17–18 in the end-semester exam

    • Seismic coefficient method
    • Substitute frame analysis
    • Design of RC frames for gravity and lateral loads

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.