SGBAU TY E&TC syllabus

SGBAU · Third Year B.E. Electronics & Telecommunication Engineering · NEP 2020

UHF & Microwave Engineering

6ET233PC · Semester VI · 3 credits · IE 40 + ESE 60

  1. Unit 1: Introduction to Microwaves and Microwave Tubes

    7 hours

    Microwave frequency bands, the limits of conventional devices at high frequency and microwave applications; the two-cavity klystron, reflex klystron, cylindrical cavity magnetron and TWT.

    Examined in the 60-mark end-semester paper

    • Microwave frequency bands and applications
    • Limitations of conventional tubes at microwaves
    • Velocity modulation and klystrons
    • Reflex klystron
    • Cavity magnetron
    • Helix travelling wave tube
  2. Unit 2: Semiconductor Microwave Devices

    5 hours

    The construction and working of Gunn, IMPATT and TRAPATT diodes, parametric amplifiers and masers.

    Examined in the 60-mark end-semester paper

    • Gunn diode
    • IMPATT and TRAPATT diodes
    • Varactor diodes and parametric amplifiers
  3. Unit 3: Waveguide Systems

    6 hours

    TE and TM modes of propagation in rectangular and circular waveguides; an introduction to parallel strip lines.

    Examined in the 60-mark end-semester paper

    • Rectangular waveguides and modes
    • TE and TM field components
    • Circular waveguides
    • Striplines
  4. Unit 4: Microwave Resonators

    6 hours

    Transmission-line resonators, rectangular and circular cavity resonators, and resonant frequency.

    Examined in the 60-mark end-semester paper

    • Transmission-line resonators
    • Cavity resonators
  5. Unit 5: Passive Microwave Devices

    6 hours

    The scattering matrix and its properties; S-matrices of the E-plane, H-plane and magic tees and the directional coupler; Faraday rotation, the isolator, gyrator and circulator.

    Examined in the 60-mark end-semester paper

    • Scattering parameters
    • S-matrices of tees, couplers, isolators and circulators
    • E-plane, H-plane and magic tees
    • Directional couplers
    • Ferrites and Faraday rotation
    • Isolators and circulators
  6. Unit 6: Microwave Measurements

    6 hours

    Measuring frequency, power, attenuation, VSWR, impedance and noise figure.

    Examined in the 60-mark end-semester paper

    • Microwave measurements: VSWR, power and impedance
    • Frequency, attenuation and phase-shift measurement

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).