SGBAU TY E&TC syllabus

SGBAU · Third Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Power Electronics

5ET223PE (i) · Elective I · Semester V · 3 credits · IE 40 + ESE 60

One of the Elective I options.

All notes for this subject
  1. Unit 1: SCR

    6 hours

    The SCR's construction and characteristics, the two-transistor analogy, the ways of turning an SCR on and its turn-off mechanism, the UJT firing circuit, and snubber protection.

    Examined in the 60-mark end-semester paper

    • SCR construction and characteristics
    • Two-transistor analogy of the SCR
    • SCR turn-on, turn-off and gate triggering
    • SCR ratings and protection
  2. Unit 2: Power Electronic Devices

    6 hours

    The construction and characteristics of the TRIAC, DIAC, power transistor, power MOSFET and IGBT; an introduction to the GTO; forced-commutation circuits.

    Examined in the 60-mark end-semester paper

    • GTO, TRIAC and UJT
    • Power MOSFET and IGBT
    • Line and forced commutation
  3. Unit 3: Phase-Controlled Rectifiers

    6 hours

    Phase control; single-phase half-wave controlled, half-controlled and fully controlled bridge rectifiers with R and RL loads, their output voltage and current, the freewheeling diode, and single-phase dual converters.

    Examined in the 60-mark end-semester paper

    • Single-phase semi-converter
    • Single-phase full converter
    • Dual converter
  4. Unit 4: Inverters

    6 hours

    Series, improved series and parallel inverters; the three-phase bridge inverter in 120° and 180° modes; the single-phase transistorised bridge inverter.

    Examined in the 60-mark end-semester paper

    • Series, parallel and class E resonant inverters
    • Single-phase half-bridge and full-bridge inverters
    • Three-phase voltage source inverter in 180° mode
  5. Unit 5: Choppers

    6 hours

    Chopper principles, time-ratio and current-limit control, the voltage-commutated and Jones choppers, step-up and step-up/down choppers, and the AC chopper.

    Examined in the 60-mark end-semester paper

    • Step-down and step-up choppers
    • Chopper control strategies
    • Voltage-commutated and Jones choppers
    • AC voltage controllers
  6. Unit 6: Cycloconverters and Applications

    6 hours

    The single-phase to single-phase cycloconverter; speed control of DC series and shunt motors with phase-controlled rectifiers; the UPS and the fan speed regulator.

    Examined in the 60-mark end-semester paper

    • Cycloconverters
    • DC motor drives
    • UPS, battery chargers and LED drivers

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).