SGBAU TY E&TC syllabus

SGBAU · Third Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Microcontroller

5ET220PC · Semester V · 3 credits · IE 40 + ESE 60

  1. Unit 1: Introduction to Microprocessors

    6 hours

    The Intel 8085's pin diagram and architecture, addressing modes and an overview of its instruction set, program-control and stack instructions, and its interrupt system.

    Examined in the 60-mark end-semester paper

    • 8085 architecture and functional blocks
    • 8085 pin diagram and signals
    • 8085 addressing modes
    • Stack and subroutines in the 8085
    • 8085 interrupt structure
  2. Unit 2: I/O Interfacing and Programming of the Intel 8085

    6 hours

    Address-space partitioning schemes and their instructions; the architecture, interfacing and programming of the 8085 with the Intel 8255 PPI.

    Examined in the 60-mark end-semester paper

    • Memory interfacing and address decoding
    • 8255 programmable peripheral interface
  3. Unit 3: Introduction to the 8051 Microcontroller

    6 hours

    How a microcontroller differs from a microprocessor; the Intel 8051's signals, architecture, register set and memory organisation.

    Examined in the 60-mark end-semester paper

    • Microprocessors versus microcontrollers
    • 8051 architecture and register set
    • 8051 pin diagram and port structure
    • 8051 memory organisation
  4. Unit 4: 8051 Programming in C

    6 hours

    Data types and time delays in 8051 C, I/O and logic operations, data-conversion programs, accessing code ROM space, and data serialisation.

    Examined in the 60-mark end-semester paper

    • Embedded C basics
    • 8051 programming in C: data types, time delays and I/O
    • Lookup tables and time-delay calculation
  5. Unit 5: Timers, Counters and Interrupts in the 8051

    6 hours

    The 8051's timer and counter structure and modes, its serial-communication registers and modes, and its interrupt structure.

    Examined in the 60-mark end-semester paper

    • 8051 timers, counters and delay generation
    • 8051 interrupts and serial communication
    • 8051 interrupt priority and programming
  6. Unit 6: Interfacing Applications

    6 hours

    Interfacing and programming the ADC 0808/0809 with the 8051, measuring physical quantities with a microcontroller, and LCD interfacing.

    Examined in the 60-mark end-semester paper

    • Interfacing ADCs and temperature sensors with the 8051
    • Interfacing LCD and seven-segment displays with the 8051
    • Data acquisition system with the 8051

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).