SGBAU TY E&TC syllabus

SGBAU · Third Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Embedded Systems

6ET232PC · Semester VI · 3 credits · IE 40 + ESE 60

  1. Unit 1: Introduction to Embedded Systems

    6 hours

    The history of embedded systems and how they differ from general computing systems; their classification, major application areas and purposes.

    Examined in the 60-mark end-semester paper

    • Embedded systems: classification and characteristics
    • Embedded systems versus general computing
  2. Unit 2: Building Blocks of Embedded Systems

    6 hours

    The core of an embedded system, memory devices, sensors and actuators, communication interfaces, embedded firmware and other components; the characteristics and quality attributes of embedded systems.

    Examined in the 60-mark end-semester paper

    • Building blocks of an embedded system
    • Sensor and actuator interfacing
    • Design metrics and optimisation
  3. Unit 3: Introduction to the AVR Microcontroller

    6 hours

    The AVR family, its history, features and peripherals; the ATmega32's signals, registers, data memory and data formats.

    Examined in the 60-mark end-semester paper

    • AVR architecture, addressing modes and instruction set
    • ATmega32 architecture, registers and data memory
  4. Unit 4: AVR Programming in C

    6 hours

    Data types and time delays, I/O programming, logic operations, data conversion and data serialisation in AVR C.

    Examined in the 60-mark end-semester paper

    • Embedded C basics
    • AVR programming in C: data types, delays and I/O
  5. Unit 5: Programming AVR Peripherals in C

    6 hours

    Memory, the timer structure, the watchdog timer, the UART, the interrupt structure and digital-to-analog converters, programmed in C.

    Examined in the 60-mark end-semester paper

    • AVR timers, UART, interrupts and DAC in C
    • Watchdog timer and RTC
  6. Unit 6: Applications with AVR C

    6 hours

    Keyboards, sensors, relays, opto-isolators and stepper motors, PWM programming and DC motor control.

    Examined in the 60-mark end-semester paper

    • Interfacing keypads, relays, stepper and DC motors with the AVR

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).