SGBAU TY E&TC syllabus

SGBAU · Third Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Control Systems

6ET234PE (i) · Elective II · Semester VI · 3 credits · IE 40 + ESE 60

One of the Elective II options.

  1. Unit 1: Introduction to Control Systems

    6 hours

    Open- and closed-loop control systems and their components; block-diagram representation and reduction rules; signal-flow graphs and Mason's gain formula.

    Examined in the 60-mark end-semester paper

    • Open-loop and closed-loop control systems
    • Block diagram reduction
    • Signal flow graphs and Mason's gain formula
  2. Unit 2: Mathematical Modelling of Systems

    6 hours

    Modelling electrical, mechanical and electromechanical systems; the transfer function and block-diagram representation of physical systems.

    Examined in the 60-mark end-semester paper

    • Mathematical models of physical systems
    • Transfer function, poles and zeros, order and type
  3. Unit 3: Time-Domain Analysis

    6 hours

    Standard test signals; the time response of first- and second-order systems and the time-domain specifications; steady-state error and error constants.

    Examined in the 60-mark end-semester paper

    • Response of first-order systems
    • Second-order systems and time-domain specifications
    • Steady-state error and static error constants
  4. Unit 4: Stability Analysis

    6 hours

    System stability, the Routh–Hurwitz criterion and relative stability; constructing the root locus; the effect of pole and zero locations on stability.

    Examined in the 60-mark end-semester paper

    • Routh–Hurwitz stability criterion
    • Root locus: rules and construction
    • Effect of adding poles and zeros on the root locus
  5. Unit 5: Frequency-Domain Analysis

    6 hours

    Frequency response, Bode and polar plots, the Nyquist stability criterion, gain and phase margins and frequency-response specifications.

    Examined in the 60-mark end-semester paper

    • Frequency response and frequency-domain specifications
    • Bode plot
    • Polar plot
    • Nyquist stability criterion
    • Gain margin and phase margin
  6. Unit 6: State-Space Analysis

    6 hours

    State variables and the state-space representation, state equations, the transfer function from a state model, and controllability and observability.

    Examined in the 60-mark end-semester paper

    • State-space representation
    • Transfer function from state space
    • Controllability and observability

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).