SGBAU · Second Year B.E. Mechanical Engineering · NEP 2020
Mechanics of Materials
3ME202PC · Semester III · 3 credits · IE 40 + ESE 60
Unit 1: Simple Stresses and Strains
Direct, bending and shear stresses and strains, biaxial and triaxial loading, elastic constants and their relations, stress–strain diagrams, factor of safety, compound bars, and thermal stresses in simple and compound bars.
Examined in the 60-mark end-semester paper
- Types of loads, stress and strain
- Hooke's law and elastic constants
- Relations between elastic constants
- Stress–strain diagrams and factor of safety
- Bars of varying section and composite bars
- Thermal stresses in plain and composite bars
Unit 2: Shear Force and Bending Moment
Types of beams; axial force, shear force and bending moment diagrams for simply supported, overhanging and cantilever beams under point loads and UDL, and the relation between load, shear force and bending moment.
Examined in the 60-mark end-semester paper
- Beams, supports and types of loading
- SFD and BMD for point loads and UDL
- Relation between load, shear force and bending moment
- Maximum bending moment and point of contraflexure
Unit 3: Bending and Shear Stresses
Simple bending theory, section modulus and moment of resistance for solid, hollow and built-up sections; semi- and quarter-elliptical leaf springs; shear stress distribution in rectangular and circular sections.
Examined in the 60-mark end-semester paper
- Theory of simple bending and the flexure formula
- Bending stress distribution and section modulus
- Leaf springs and nipping
- Shear stress distribution in beams
Unit 4: Torsion, Springs and Strain Energy
The torsion equation, polar modulus and stresses in solid and hollow shafts and the power they transmit; closely coiled helical springs under axial load; strain energy under gradual, sudden and impact loads.
Examined in the 60-mark end-semester paper
- Torsion of circular shafts
- Power transmission by shafts: strength and rigidity
- Design of helical springs
- Strain energy under gradual, sudden and impact loads
Unit 5: Thin Shells and Compound Stresses
Thin cylinders and spheres under internal pressure; biaxial stress, principal stresses and planes, Mohr's circle and principal strains.
Examined in the 60-mark end-semester paper
- Thin cylindrical and spherical shells
- Principal stresses and planes
- Mohr's circle for plane stress
Unit 6: Slope and Deflection
Slope and deflection of simply supported and cantilever beams under point loads and UDL by Macaulay's method, and end conditions.
Examined in the 60-mark end-semester paper
- Double integration method
- Macaulay's method
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).