SGBAU SY E&TC syllabus

SGBAU · Second Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Network Theory

4ET211PC · Semester IV · 2 credits · IE 40 + ESE 60

  1. Unit 1: Mesh and Node Analysis

    4 hours

    Circuit components and sources of electrical energy, Kirchhoff's laws, node and mesh analysis, and the matrix approach for AC networks with voltage and current sources.

    Examined in the 60-mark end-semester paper

    • Mesh and nodal analysis with dependent sources
    • Supermesh and supernode analysis
    • Phasors and sinusoidal steady-state analysis
  2. Unit 2: Network Theorems

    4 hours

    Superposition, Thévenin's, Norton's and maximum power transfer theorems applied to DC circuits.

    Examined in the 60-mark end-semester paper

    • Superposition and source transformation
    • Thevenin's and Norton's theorems
    • Maximum power transfer theorem
  3. Unit 3: Network Topology

    4 hours

    The graph of a network, trees, co-trees and loops, the incidence matrix, tie-set and cut-set matrices and network analysis with them, and duality.

    Examined in the 60-mark end-semester paper

    • Network topology
    • Incidence, tie-set and cut-set matrices
  4. Unit 4: Application of the Laplace Transform

    4 hours

    The initial and final value theorems; analysis of RL, RC and RLC networks with and without initial conditions.

    Examined in the 60-mark end-semester paper

    • Initial and final value theorems
    • Circuit analysis in the s-domain
    • Transient response of RL and RC circuits
    • Step response of RLC circuits and damping
  5. Unit 5: Network Functions

    4 hours

    Ports and terminal pairs, network functions, poles and zeros, conditions for driving-point and transfer functions, and time-domain behaviour from the pole-zero plot.

    Examined in the 60-mark end-semester paper

    • Network functions: driving point and transfer
    • Poles and zeros of network functions
  6. Unit 6: Two-Port Networks

    4 hours

    Open-circuit impedance, short-circuit admittance, transmission and hybrid parameters, and the conditions for reciprocity and symmetry.

    Examined in the 60-mark end-semester paper

    • Two-port parameters: Z, Y, ABCD and h
    • Reciprocity and symmetry in two-port networks

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).