SGBAU SY E&TC syllabus

SGBAU · Second Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Electronic Devices and Circuits

3ET200PC · Semester III · 3 credits · IE 40 + ESE 60

  1. Unit 1: Introduction to Diodes

    6 hours

    The PN junction diode's construction, working, diode equation and V-I characteristics; the Zener diode, LED and photodiode, their construction, working and characteristics.

    Examined in the 60-mark end-semester paper

    • Light emitting diodes
    • PIN photodiode
  2. Unit 2: Applications of Diodes

    6 hours

    The diode as a switch and rectifier; half-wave and full-wave rectifiers with C, L, LC and CLC filters; clipping and clamping circuits; the Zener diode as a voltage regulator.

    Examined in the 60-mark end-semester paper

    • Rectifier and filter circuits: ripple factor, PIV and TUF
    • Diode clippers, clampers and RC wave-shaping circuits
    • Series and shunt transistor voltage regulators
  3. Unit 3: Bipolar Junction Transistors

    6 hours

    CB, CE and CC configurations with their characteristics and parameters; the transistor as a switch and its switching times; the DC load line, biasing methods and bias stability; h-parameters and the hybrid model.

    Examined in the 60-mark end-semester paper

    • BJT characteristics in CE configuration
    • DC load line, Q-point and BJT biasing
    • Hybrid-pi model and CE amplifier analysis
  4. Unit 4: JFET, MOSFET and UJT

    6 hours

    JFET theory, construction, characteristics and parameters (μ, gm, rd); enhancement and depletion MOSFETs; the UJT and the UJT relaxation oscillator.

    Examined in the 60-mark end-semester paper

    • JFET characteristics and parameters
    • Enhancement MOSFET: structure and characteristics
    • BJT versus MOSFET
    • GTO, TRIAC and UJT
  5. Unit 5: Feedback Amplifiers and Oscillators

    6 hours

    The feedback concept, the effects of negative feedback and the basic feedback topologies; the Barkhausen criterion and Hartley, Colpitts, RC phase-shift, Wien bridge and crystal oscillators.

    Examined in the 60-mark end-semester paper

    • Feedback topologies and their effects
    • Voltage-series and current-series feedback amplifiers
    • Barkhausen criterion and types of oscillators
    • Hartley and Colpitts oscillators
    • RC phase-shift oscillator
    • Wien bridge oscillator
    • Crystal oscillator
  6. Unit 6: Multistage Amplifiers

    6 hours

    Why amplifiers are cascaded; RC-coupled, transformer-coupled and direct-coupled amplifiers; the emitter follower, the Darlington emitter follower and the bootstrapping principle.

    Examined in the 60-mark end-semester paper

    • RC-coupled CE amplifier and its frequency response
    • Miller's theorem
    • Source follower

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).