SGBAU · Second Year B.E. Electronics & Telecommunication Engineering · NEP 2020
Analog & Digital Communications
4ET209PC · Semester IV · 3 credits · IE 40 + ESE 60
Unit 1: AM Transmitters
6 hoursModulation and the need for it; AM with its expression and numericals; the principles of DSB-FC, DSB-SC and SSB-SC modulation compared; the DSB-FC transmitter.
Examined in the 60-mark end-semester paper
- Need for modulation and amplitude modulation
- AM spectrum, modulation index and power
- DSB-SC modulation
- SSB and VSB modulation
- Generation of AM: low and high-level modulation
Unit 2: FM Transmitters
6 hoursFrequency modulation; direct FM generation with a FET and varactor diode and indirect FM generation; narrowband and wideband FM, pre-emphasis and de-emphasis, and the stereo FM transmitter.
Examined in the 60-mark end-semester paper
- Frequency modulation and modulation index
- Narrowband and wideband FM
- Direct FM generation: FET and varactor-diode modulators
- FM generation: Armstrong's method
- Pre-emphasis and de-emphasis
Unit 3: Radio Receivers
6 hoursReceiver sensitivity, selectivity and fidelity; the TRF and superheterodyne receivers; the diode detector for AM, and slope detectors and the Foster–Seeley discriminator for FM.
Examined in the 60-mark end-semester paper
- Receiver characteristics: sensitivity, selectivity, fidelity and image rejection
- TRF and superheterodyne receivers
- Practical diode detector
- Slope and ratio detectors
- Foster–Seeley discriminator
Unit 4: Random Process and Noise
6 hoursThe classification of noise; random variables, ensembles, mean and moments, probability density and cumulative distribution functions; random processes, ensemble and time averages, stationarity and ergodicity.
Examined in the 60-mark end-semester paper
- Sources and types of noise
- Discrete and continuous random variables
- Probability density functions
- Random processes: stationarity and ergodicity
Unit 5: Pulse Modulation
6 hoursPulse amplitude, width and position modulation; an introduction to pulse code modulation, differential PCM, delta modulation and adaptive delta modulation.
Examined in the 60-mark end-semester paper
- PAM, PWM and PPM
- Pulse code modulation
- Delta-sigma modulation and DPCM
- Delta and adaptive delta modulation
Unit 6: Introduction to Digital Communication Systems
6 hoursThe functional blocks of a digital communication system; line coding, its need, properties and types; scramblers and unscramblers; ASK, FSK, PSK, QPSK and DPSK.
Examined in the 60-mark end-semester paper
- Line coding formats
- Bit and frame synchronisation, scramblers
- BASK, BFSK and BPSK
- QPSK, OQPSK and M-ary PSK
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).