SGBAU · Second Year B.E. Electronics & Telecommunication Engineering · NEP 2020
Analog Circuits
4ET210PC · Semester IV · 3 credits · IE 40 + ESE 60
Unit 1: Operational Amplifier
6 hoursThe op-amp block diagram; BJT differential amplifier configurations, the constant current source and level shifting; transfer characteristics and frequency response; the µA741 and op-amp parameters.
Examined in the 60-mark end-semester paper
- Op-amp block diagram and ideal characteristics
- Differential amplifiers, current sources and level shifting
- Op-amp parameters: DC and AC
- Frequency response of op-amp circuits and Bode plots
Unit 2: Linear Applications of the Op-Amp
6 hoursInverting and non-inverting amplifiers, scaling, summing and differential amplifiers, the integrator and differentiator; oscillator principles and the RC phase-shift and Wien bridge oscillators with the IC 741.
Examined in the 60-mark end-semester paper
- Inverting and non-inverting amplifiers
- Voltage follower, summing and differential amplifiers
- Practical integrator and differentiator
- RC phase-shift oscillator
- Wien bridge oscillator
Unit 3: Non-Linear Applications of the Op-Amp
6 hoursIC 741 comparators, zero-crossing and window detectors and the Schmitt trigger; the astable multivibrator as a square and triangular wave generator, and monostable and bistable multivibrators.
Examined in the 60-mark end-semester paper
- Comparators and the Schmitt trigger
- Zero-crossing and window detectors
- Square and triangular wave generators
- Op-amp monostable and bistable multivibrators
Unit 4: Active Filters
6 hoursButterworth first- and second-order low-pass, high-pass, band-pass, band-reject and all-pass filters and the notch filter; the instrumentation amplifier, the bridge amplifier and an RTD temperature controller.
Examined in the 60-mark end-semester paper
- First and second-order active filters
- Notch and all-pass filters
- Instrumentation amplifier
Unit 5: Voltage Regulators
6 hoursFixed and variable regulators with the IC 723 and LM 317, and fixed regulators with the 78XX and 79XX ICs.
Examined in the 60-mark end-semester paper
- Power supply block diagram and three-terminal regulators
- IC 723 voltage regulator
- Adjustable regulators: IC 317 and IC 337
Unit 6: Timer IC 555 and PLL IC 565
6 hoursThe IC 555 and its astable and monostable multivibrators; the phase-locked loop, its transfer characteristics, lock and capture range, and the LM 565 PLL and its applications.
Examined in the 60-mark end-semester paper
- IC 555 timer
- Astable and monostable multivibrators using IC 555
- Phase-locked loop and its applications
- PLL dynamics and lock acquisition
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).