SGBAU · Second Year B.E. Electrical Engineering · NEP 2020
Electrical Measurements & Instrumentation
3EE202PC · Semester III · 3 credits · IE 40 + ESE 60
Unit 1: Analog Instruments
Classification of instruments and the torques in them; construction, theory, torque equation, errors, merits and demerits of PMMC, moving-iron and electrodynamic ammeters and voltmeters; extending their ranges.
Examined in the 60-mark end-semester paper
- Classification of measuring instruments
- Deflecting, controlling and damping systems
- PMMC instruments
- Moving-iron instruments
- Extending the range of ammeters and voltmeters
Unit 2: Wattmeter and Energy Meter
Construction, theory, torque equation and errors of wattmeters and energy meters; three-phase balanced loads and Blondel's theorem; measuring active and reactive power in single- and three-phase circuits.
Examined in the 60-mark end-semester paper
- Dynamometer wattmeter
- Single-phase induction energy meter
- Two-wattmeter method
- Reactive power measurement in three-phase circuits
Unit 3: Instrument Transformers and Special Instruments
Current and potential transformers: theory, construction, phasor diagram, errors and applications; phase-sequence indicator, power-factor meter, synchroscope and stroboscope.
Examined in the 60-mark end-semester paper
- Current and potential transformers
- Ratios and burden of instrument transformers
- Electrodynamometer power factor meter
- Phase sequence indicator, synchroscope and stroboscope
Unit 4: Measurement of Circuit Parameters
Measuring low, medium and high resistance; Wheatstone, Kelvin, Maxwell, Hay, De Sauty, Schering and Anderson bridges.
Examined in the 60-mark end-semester paper
- Wheatstone bridge
- Kelvin's double bridge
- Measuring high resistance: loss of charge and megger
- AC bridge balance equation
- Maxwell's bridges
- Schering bridge
- Anderson, De Sauty and Wien bridges
Unit 5: Digital Methods of Measurement
A/D and D/A conversion, F/V and V/F conversion; digital voltmeter, ammeter and wattmeter, the electronic energy meter, errors in digital meters.
Examined in the 60-mark end-semester paper
- ADC and DAC: ADC0808 and DAC0808
- Digital voltmeter and frequency meter
- Resolution and sensitivity of digital meters
- Static energy meters and TOD metering
Unit 6: Generalized Instrumentation System and Transducers
Characteristics of measurement and instrumentation systems; transducers: classification, specification, selection and loading; displacement and velocity, resistive, inductive, capacitive, strain-gauge, piezoelectric, current and voltage transducers; elastic members.
Examined in the 60-mark end-semester paper
- Static and dynamic characteristics of instruments
- Classification and selection of transducers
- LVDT and RVDT
- Strain gauges, shaft encoders and tachometers
- Temperature, Hall-effect and piezoelectric sensors
- Current and voltage sensor modules
- Pressure measurement: manometers, Bourdon tube, bellows, diaphragms
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).