SGBAU SY Electrical syllabus

SGBAU · Second Year B.E. Electrical Engineering · NEP 2020

Electrical Circuit Analysis

3EE201PC · Semester III · 3 credits · IE 40 + ESE 60

  1. Unit 1: Terminal Element Relationships, Magnetic Circuits, Node and Mesh Analysis

    V-I relationships of dependent and independent sources and source transformation; self and mutual inductance, the dot convention and coupling coefficient; series and parallel magnetic circuits; node, supernode, mesh and supermesh analysis.

    Examined in the 60-mark end-semester paper

    • Independent and dependent sources
    • Source transformation
    • Dot convention for coupled circuits
    • Magnetic circuits and reluctance
    • Nodal analysis and supernode
    • Mesh analysis and supermesh
  2. Unit 2: Network Theorems

    Superposition, Thevenin's, Norton's, maximum power transfer, reciprocity, Millman's, substitution and Tellegen's theorems.

    Examined in the 60-mark end-semester paper

    • Superposition theorem
    • Thevenin's and Norton's theorems
    • Maximum power transfer theorem
    • Reciprocity and Millman's theorems
    • Tellegen's theorem
  3. Unit 3: Graph Theory and Network Equations

    The graph of a network, trees and loops; tie-set, cut-set and incidence matrices; network equilibrium equations; duality.

    Examined in the 60-mark end-semester paper

    • Graph of a network: tree and co-tree
    • Graph theory: incidence, loop and cut-set matrices
    • Network equilibrium equations and duality
  4. Unit 4: Transformation of a Circuit into the s-Domain

    Laplace transforms of step, ramp, gate, impulse and periodic sources; transformed inductance, capacitance and mutual inductance; impedance and admittance in the transform domain; node and mesh analysis of transformed circuits; series and parallel RC and RL circuits.

    Examined in the 60-mark end-semester paper

    • Laplace transforms of circuit elements
    • Transformed networks with initial conditions
    • Response to step, ramp and exponential inputs
    • Transient response of RL and RC circuits
    • Solving RLC circuits with Laplace transforms
  5. Unit 5: Two-Port Networks

    Open-circuit impedance, short-circuit admittance, transmission and hybrid parameters; conditions for reciprocity and symmetry; relations between parameters; interconnection of two-ports; input impedance.

    Examined in the 60-mark end-semester paper

    • Z, Y and transmission parameters
    • Hybrid parameters of two-port networks
    • Relationships between two-port parameters
    • Symmetrical and asymmetrical networks
    • Interconnection of two-port networks
  6. Unit 6: Network Functions

    Ports and terminal pairs; network functions, poles and zeros; necessary conditions for driving-point and transfer functions; positive real functions.

    Examined in the 60-mark end-semester paper

    • Network functions of one-port and two-port networks
    • Poles and zeros of network functions
    • Positive real functions

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).