SGBAU · Second Year B.E. Civil Engineering · NEP 2020
Transportation Engineering
4CE210PC · Semester IV · 3 credits · IE 40 + ESE 60
Unit 1: Introduction to Transportation Systems
7 hoursScope of transportation engineering, road, rail, air and water transport and their role in economic development, and the principles of highway planning and alignment.
Examined in the 60-mark end-semester paper
- Road development plans in India
- Classification of roads and road patterns
- Highway alignment
Unit 2: Geometric Design
8 hoursCross-section elements, camber and gradient, the PIEV theory and stopping and overtaking sight distances, horizontal curves, superelevation, extra widening and transition curves, summit and valley curves, and IRC standards.
Examined in the 60-mark end-semester paper
- Highway cross-section elements
- Sight distance
- Design of horizontal alignment
- Design of vertical alignment
Unit 3: Pavement Design
8 hoursPavement components, flexible and rigid pavements and their materials, design considerations, and structural design by IRC methods.
Examined in the 60-mark end-semester paper
- Flexible and rigid pavements
- Tests on road aggregates
- Bituminous binders and modified bitumen
- Flexible pavement design to IRC 37
- Rigid pavement design to IRC 58
Unit 4: Railway Engineering
7 hoursRails, sleepers, ballast and fastenings, track geometry and alignment, and stations and yards.
Examined in the 60-mark end-semester paper
- Permanent way and its components
- Railway gauges
- Geometric design of railway track
- Station yards and track maintenance
Unit 5: Airport and Waterway Engineering
8 hoursRunways, taxiways, terminals and aprons, airport layout, air traffic control and capacity; ports, harbours, dockyards and terminals, and navigation aids.
Examined in the 60-mark end-semester paper
- Airport planning and runway orientation
- Taxiways, aprons and airport drainage
- Navigation aids and air traffic control
- Docks and harbours: types and planning
- Port operations and berthing facilities
Unit 6: Bridge Engineering
7 hoursBridge components and classification, data collection and site selection, economic span, flood discharge, waterway, scour, afflux and clearance; culverts, foundations, abutments, piers and wing walls.
Examined in the 60-mark end-semester paper
- Classification and components of bridges
- Bridge site investigation and scour
- Bridge hydrology: design flood, waterway and afflux
- Culverts and causeways
- Bridge foundations, piers and abutments
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).