SGBAU SY Civil syllabus

SGBAU · Second Year B.E. Civil Engineering · NEP 2020

Strength of Material

3CE200PC · Semester III · 3 credits · IE 40 + ESE 60

  1. Unit 1: Introduction and Basic Concepts

    8 hours

    Direct and shear stresses and strains, elastic constants, stress–strain relations and the stress–strain diagram for mild steel, the generalised Hooke's law and mechanical properties of materials.

    Examined in the 60-mark end-semester paper

    • Stress, strain and stress–strain diagrams
    • Elastic constants and their relations
  2. Unit 2: Basics of Beam Analysis

    8 hours

    Types of beams, shear force and bending moment diagrams for different loadings, and the relation between shear force, bending moment and loading intensity.

    Examined in the 60-mark end-semester paper

    • Shear force and bending moment: concepts and relations
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL and couples
  3. Unit 3: Bending Stress in Beams

    8 hours

    Moment of inertia and section modulus, simple bending theory, moment of resistance, and bending stress distribution in solid and hollow sections.

    Examined in the 60-mark end-semester paper

    • Area moment of inertia
    • Theory of simple bending and the flexure formula
    • Bending stress distribution and moment of resistance
  4. Unit 4: Torsion of Circular Shafts

    7 hours

    Assumptions and the torsion equation, angle of twist, and power transmission by shafts.

    Examined in the 60-mark end-semester paper

    • Torsion of circular shafts
    • Power transmitted by shafts
  5. Unit 5: Analysis of Stress and Strain

    7 hours

    Stresses and strains in compound bars under uniaxial tension and compression, principal stresses and maximum shear stress.

    Examined in the 60-mark end-semester paper

    • Bars of composite sections
    • Stresses on an oblique plane
    • Principal stresses and maximum shear stress
  6. Unit 6: Deflection and Slope of Beams

    7 hours

    Slope and deflection of beams under different loading conditions.

    Examined in the 60-mark end-semester paper

    • Slope and deflection by Macaulay's method
    • Double integration and moment-area methods

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).