RTMNU TY Mechanical syllabus

RTMNU · Third Year B.Tech Mechanical Engineering · NEP 2020

Mechanics of Materials

BME5T14 · Semester V · 2 credits · College 30 + university 70

The syllabus has four units; it prints the third as "Unit II".

  1. Unit 1: Simple Stresses and Strains; Principal Stresses

    7 hours

    Stress, strain and their diagrams for brittle and ductile materials, Hooke's law, the elastic moduli, factor of safety, tapered and composite bars, thermal stresses, Poisson's ratio, volumetric strain and the relations between the elastic constants; principal planes and stresses, stresses on oblique sections and Mohr's circle.

    Examined in the 70-mark end-semester paper

    • Types of loads, stress and strain
    • Hooke's law and elastic constants
    • Stress–strain diagrams and factor of safety
    • Bars of varying section and composite bars
    • Thermal stresses in plain and composite bars
    • Relations between elastic constants
    • Stresses on an oblique plane
    • Principal stresses and planes
    • Mohr's circle for plane stress
  2. Unit 2: Shear Force and Bending Moment; Stresses in Beams

    7 hours

    Types of beams and loads, shear force and bending moment diagrams for concentrated loads, UDL and couples, and the relation between load, shear force and bending moment; pure bending and the theory of simple bending, and the shear stress distribution in beams.

    Examined in the 70-mark end-semester paper

    • Beams, supports and types of loading
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL, couples and combined loads
    • Relation between load, shear force and bending moment
    • Theory of simple bending and the flexure formula
    • Shear stress distribution in beams
  3. Unit 3: Deflection of Beams; Strain Energy

    7 hours

    Slope and deflection of cantilever, simply supported and overhanging beams under concentrated loads and UDL, the slope–deflection–curvature relation and Macaulay's method; strain energy under gradual, sudden and impact loads.

    Examined in the 70-mark end-semester paper

    • Double integration method
    • Macaulay's method
    • Strain energy under gradual, sudden and impact loads
  4. Unit 4: Torsion of Shafts; Columns and Struts

    7 hours

    The torsion equation and its assumptions, torque transmitted by solid and hollow shafts, strength and rigidity in shaft design, and equivalent twisting and bending moments under combined loads; failure of long and short columns, slenderness ratio and Euler's crippling load for various end conditions.

    Examined in the 70-mark end-semester paper

    • Torsion of circular shafts
    • Power transmission by shafts: strength and rigidity
    • Combined normal and shear stresses
    • Euler's theory of columns and end conditions
    • Rankine's formula

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).