RTMNU TY Mechanical syllabus

RTMNU · Third Year B.Tech Mechanical Engineering · NEP 2020

Machine Tool Design

BME5T17B · Elective I · Semester V · 3 credits · College 30 + university 70

One of the Elective I options.

  1. Unit 1: Fundamentals of Machine Tool Design

    8 hours

    Machines and machine tools, basic design requirements and procedure, design factors (factor of safety, stress concentration and service factor), maintainability, classification, working and auxiliary motions, the kinematics of machine tools and motion transmission.

    Examined in the 70-mark end-semester paper

    • Machine tools and their general requirements
    • Design procedure for machine tools
    • Working and auxiliary motions in machine tools
    • Kinematic structure of machine tools
  2. Unit 2: Speed and Feed Control

    8 hours

    Why speeds and feeds are regulated, stepped speed control, design of speed and feed gearboxes, special cases of gearbox design and the number of teeth on each gear.

    Examined in the 70-mark end-semester paper

    • Stepped speed regulation and geometric progression
    • Ray diagrams and structural formulae for gearboxes
    • Design of speed gearboxes
    • Design of feed gearboxes
    • Numbers of teeth in machine tool gearboxes
  3. Unit 3: Machine Tool Structures

    8 hours

    Materials and design criteria for structures, static and dynamic stiffness, and the design of beds, columns, housings, bases, tables, cross rails, arms, saddles, carriages and rams.

    Examined in the 70-mark end-semester paper

    • Machine tool structures: materials and design criteria
    • Static and dynamic stiffness of machine tool structures
    • Design of beds and columns
    • Design of tables, saddles, cross rails and rams
  4. Unit 4: Guideways and Power Screws

    8 hours

    Functions and types of guideways, design of slideways, hydrostatic, hydrodynamic and aerostatic slideways, antifriction and combination guideways, protecting devices, and the design of power screws.

    Examined in the 70-mark end-semester paper

    • Functions and types of guideways
    • Design of slideways for wear and stiffness
    • Hydrostatic, aerostatic and antifriction guideways
    • Protecting devices for slideways
    • Power screw terminology and torque
  5. Unit 5: Ergonomics and Aesthetics

    8 hours

    The man–machine relationship and anthropometric data, ergonomic design of push buttons, knobs, levers, cranks and hand wheels, the type and location of displays and compatibility of controls; aesthetic shape, line, form, finish and colour.

    Examined in the 70-mark end-semester paper

    • Ergonomics in machine tool design
    • Design of controls and displays for machine tools
    • Aesthetics in machine tool design

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).