RTMNU TY Mechanical syllabus

RTMNU · Third Year B.Tech Mechanical Engineering · NEP 2020

Heat Transfer

BME5T16 · Semester V · 3 credits · College 30 + university 70

  1. Unit 1: Conduction Basics

    8 hours

    Modes and laws of heat transfer, the general conduction equation in Cartesian, cylindrical and spherical coordinates, one-dimensional steady conduction through plane walls, cylinders and spheres, the overall coefficient, composite resistances, contact resistance and the critical thickness of insulation.

    Examined in the 70-mark end-semester paper

    • Modes of heat transfer and their laws
    • General heat conduction equation
    • Steady conduction through plane walls
    • Conduction through cylinders and spheres
    • Thermal resistance networks and overall coefficient
    • Critical radius of insulation
  2. Unit 2: Heat Generation, Unsteady Conduction and Fins

    8 hours

    Conduction with internal heat generation in a plane wall, cylinder and sphere; lumped heat capacity analysis and the Biot and Fourier numbers; types of fins, their temperature distribution, heat transfer, efficiency and effectiveness.

    Examined in the 70-mark end-semester paper

    • Conduction with internal heat generation
    • Lumped heat capacity analysis
    • Biot and Fourier numbers and Heisler charts
    • Heat transfer from fins
    • Fin efficiency and effectiveness
  3. Unit 3: Convection, Boiling and Condensation

    8 hours

    Hydrodynamic and thermal boundary layers, local and average coefficients, forced convection over a flat plate and cylinder and in laminar and turbulent pipe flow; natural convection from vertical plates and cylinders; pool boiling regimes and film and dropwise condensation.

    Examined in the 70-mark end-semester paper

    • Convection and boundary layers
    • Dimensionless numbers in convection
    • Forced convection correlations
    • Natural convection
    • Boiling heat transfer
    • Condensation heat transfer
  4. Unit 4: Radiation

    8 hours

    Laws of radiation, emissivity, absorptivity, transmissivity, reflectivity, radiosity and irradiation; shape factors and their laws, radiation exchange between parallel plates, cylinders and spheres, and radiation shields.

    Examined in the 70-mark end-semester paper

    • Laws of thermal radiation
    • Radiation properties of surfaces
    • Shape factors
    • Radiation exchange between surfaces
    • Radiation shields
  5. Unit 5: Heat Exchangers

    8 hours

    Classification, the overall heat transfer coefficient and fouling factor, and the LMTD and effectiveness–NTU methods for parallel- and counter-flow exchangers.

    Examined in the 70-mark end-semester paper

    • Classification of heat exchangers and fouling
    • LMTD method
    • Effectiveness–NTU method

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).