RTMNU TY Electrical syllabus

RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020

Power Electronics

BEL6T18 · Semester VI · 3 credits · College 30 + university 70

  1. Unit 1: Power Semiconductor Devices

    10 hours

    The SCR: V-I, dynamic and gate characteristics, the two-transistor analogy, the UJT relaxation oscillator, and series and parallel connection; MOSFET, IGBT and TRIAC structure and characteristics; natural and forced (class A to F) commutation.

    Examined in the 70-mark end-semester paper

    • SCR characteristics and ratings
    • Two-transistor analogy of the SCR
    • SCR triggering circuits
    • Series and parallel operation of SCRs
    • Power MOSFET and IGBT
    • TRIAC
    • Commutation techniques
  2. Unit 2: Phase-Controlled Rectifiers

    10 hours

    Single-phase half-controlled and fully controlled bridge rectifiers with R and RL loads and the semiconverter; three-phase half-wave and full-wave controlled bridges; the effect of source inductance and the freewheeling diode; circulating and non-circulating dual converters.

    Examined in the 70-mark end-semester paper

    • Single-phase half-controlled converter
    • Single-phase fully controlled converter
    • Three-phase half-controlled converter
    • Three-phase fully controlled converter
    • Effect of source inductance and overlap angle
    • Freewheeling diode
    • Dual converter
  3. Unit 3: DC-DC Converters (Choppers)

    8 hours

    Buck, boost and buck-boost choppers; two- and four-quadrant operation; output voltage control by current-limit and time-ratio control.

    Examined in the 70-mark end-semester paper

    • Buck converter
    • Boost converter
    • Buck-boost converter
    • Chopper principle and control techniques
    • Chopper classes A to E
  4. Unit 4: DC-AC Inverters

    9 hours

    Single-phase and three-phase bridge inverters in 120° and 180° modes; output voltage control; harmonic reduction by single, multiple and sinusoidal PWM; the current-source inverter and VSI compared with CSI.

    Examined in the 70-mark end-semester paper

    • Single-phase full-bridge inverter
    • Three-phase inverter: 120 and 180 degree modes
    • Voltage control of single and three-phase inverters
    • PWM techniques
    • Current source inverters
  5. Unit 5: AC Voltage Controllers, Cycloconverters and Applications

    8 hours

    Single-phase AC voltage controllers with R and RL loads and TRIAC phase control; the single-phase cycloconverter; applications of power electronics in renewable energy systems, electric vehicles and battery charging.

    Examined in the 70-mark end-semester paper

    • Single-phase AC voltage controller
    • Cycloconverters
    • Power electronics in EV drives

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).