RTMNU TY Electrical syllabus

RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020

PLC and SCADA

BEL5T16A · Elective I · Semester V · 4 credits · College 30 + university 70

One of the Elective I options. Program Elective I: 4 credits (3 lectures + 1 tutorial). The OCR lost Unit II's hours.

All notes for this subject
  1. Unit 1: Introduction to PLC

    8 hours

    The need for and tools of automation; evolution of the PLC; PLC architecture, block diagram and working; selection and types of PLCs, their advantages, limitations and applications; networking of PLCs.

    Examined in the 70-mark end-semester paper

    • Principles and levels of automation
    • PLC definition and evolution
    • PLC hardware: CPU and I/O modules
    • PLC selection
    • PLC networking
  2. Unit 2: PLC Hardware

    Input and output modules: working, description, wiring details, specifications and interfacing; instruction sets for given operations and ladder logic for some applications.

    Examined in the 70-mark end-semester paper

    • Digital input devices
    • Analog input devices
    • Output devices and drives
    • Ladder diagram programming
  3. Unit 3: PLC Programming and Applications

    10 hours

    PLC programming languages and the programming standard; relay-type, timer, counter, arithmetic and data-handling instructions; PLC applications such as motor control and traffic lights.

    Examined in the 70-mark end-semester paper

    • IEC 61131-3 PLC programming languages
    • Timers and counters
    • Compare instructions
    • Latch, unlatch and master control relay
    • Ladder logic applications
    • Motor control with PLCs
  4. Unit 4: SCADA Systems and Human Machine Interface

    9 hours

    SCADA architecture and components: RTUs, PLCs, the communication system, the SCADA server and the HMI; data acquisition, supervisory control, alarm management, historical logging and trend analysis; SCADA software and HMI screen design; applications in power-system monitoring, water treatment and oil and gas.

    Examined in the 70-mark end-semester paper

    • SCADA architecture: HMI, MTU and RTU
    • SCADA alarm handling, trending, logging and reports
    • SCADA user interfaces
    • SCADA hardware and software configuration
    • SCADA in power systems
    • SCADA in pipelines and pumping stations
  5. Unit 5: Industrial Communication and Advanced Automation

    9 hours

    Industrial networks: Modbus, Profibus, DeviceNet and industrial Ethernet; PLC networking and PLC-SCADA communication; OPC; cybersecurity in industrial automation; introduction to distributed control systems, the industrial Internet of Things and Industry 4.0.

    Examined in the 70-mark end-semester paper

    • Modbus and DNP3
    • Profibus and industrial Ethernet
    • SCADA communication and standard protocols
    • OPC and cybersecurity in industrial automation
    • Distributed control systems

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).