RTMNU TY Electrical syllabus

RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020

HV Engineering

BEL6T21B · Elective III · Semester VI · 4 credits · College 30 + university 70

One of the Elective III options. Program Elective III: 4 credits (3 lectures + 1 tutorial). The PDF prints "Unit II" twice; the second is Unit III, whose hours the OCR lost.

  1. Unit 1: Breakdown Mechanisms in Dielectrics

    9 hours

    Insulation and dielectric properties; uniform and non-uniform fields; ionisation, Townsend and streamer theories; vacuum breakdown; liquid dielectrics, their breakdown and the factors affecting transformer oil; breakdown of solid dielectrics, treeing, tracking and internal discharge.

    Examined in the 70-mark end-semester paper

    • Ionisation processes in gases
    • Townsend's theory of breakdown
    • Streamer theory
    • Breakdown in vacuum
    • Breakdown in liquid dielectrics
    • Breakdown in solid dielectrics
    • Treeing and tracking
  2. Unit 2: Lightning and Switching Overvoltages

    9 hours

    The mechanism of lightning, types of strokes and their parameters; switching surges and power-frequency overvoltages and their control; protection by ground wires, lightning arresters (types and ratings) and surge absorbers; volt-time characteristics.

    Examined in the 70-mark end-semester paper

    • Lightning phenomenon
    • Switching surges
    • Surge diverters and overvoltage protection
    • Protection of lines and substations against lightning
  3. Unit 3: Generation of High Voltages and Currents

    High DC voltages from rectifiers, voltage doublers and multipliers; high AC voltages from cascade and resonant transformers and the Tesla coil; single- and multistage impulse generators and the Marx circuit; switching surges and impulse currents.

    Examined in the 70-mark end-semester paper

    • Generation of high DC voltages
    • Generation of high AC voltages
    • Impulse voltage waveshape
    • Marx impulse generator
    • Impulse current generation
  4. Unit 4: Measurement of High Voltages and Currents

    9 hours

    Measuring high AC and DC voltages by microammeter, generating voltmeter, resistance and capacitance potential dividers and CVTs; peak-reading AC voltmeters; the sphere gap; impulse voltages by potential dividers and peak-reading voltmeters; high AC and DC currents, and high-frequency and impulse currents.

    Examined in the 70-mark end-semester paper

    • Measurement of high DC and AC voltages
    • Sphere gap measurement
    • Potential dividers
    • Measurement of impulse voltages
    • Measurement of high currents
  5. Unit 5: High-Voltage Testing and Insulation Coordination

    9 hours

    High-voltage testing of apparatus to international and Indian standards: power-frequency and impulse tests, and DC tests on insulators, circuit breakers, bushings, isolators and transformers; basic insulation levels, surge protection and coordination.

    Examined in the 70-mark end-semester paper

    • IEC and IS codes for high voltage tests
    • Testing of insulators and bushings
    • Testing of circuit breakers and transformers
    • Insulation coordination

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).