RTMNU TY Electrical syllabus

RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020

Electrical Machines-II

BEL5T13 · Semester V · 3 credits · College 30 + university 70

The PDF prints no hours for Unit V.

  1. Unit 1: Induction Motor

    9 hours

    The dynamic model of the induction machine in the stationary reference frame and its d-q axis model; speed control by variable frequency, stator voltage, pole changing, cascade connection and rotor resistance; dynamic (rheostatic), plugging and regenerative braking.

    Examined in the 70-mark end-semester paper

    • Dynamic d-q model of the induction machine
    • Clarke and Park transformations
    • Speed control of induction motors
    • Braking of induction motors
  2. Unit 2: Voltage Regulation and Parallel Operation of Alternators

    9 hours

    Equivalent circuit and phasor diagrams of a synchronous generator; voltage regulation by the zero power factor method and the Potier triangle; parallel operation of alternators: reasons, necessary conditions and the synchronising procedure.

    Examined in the 70-mark end-semester paper

    • Synchronous reactance and phasor diagram
    • Potier triangle method
    • Parallel operation of alternators
    • Synchronising an alternator
  3. Unit 3: Synchronous Machine Performance

    9 hours

    Machine equations in the rotor reference frame and the d-q axis model of the synchronous machine; two-reaction theory of the salient-pole machine, its phasor diagram and the slip test; power flow in the synchronous motor; synchronising power and torque; hunting and its prevention; the synchronous motor compared with the induction motor, and applications.

    Examined in the 70-mark end-semester paper

    • Synchronous machine d-q axes and Park's transformation
    • Two-reaction theory and the slip test
    • Power-angle relation
    • Synchronising power and synchronising torque
    • Hunting
    • Synchronous versus induction motors
  4. Unit 4: Transient Behaviour of Synchronous Machines

    9 hours

    Short-circuit ratio and sequence components; the sudden three-phase short circuit and the constant flux linkage theorem; transient and subtransient reactances and time constants with the equivalent circuit; determination of negative- and zero-sequence reactances.

    Examined in the 70-mark end-semester paper

    • Short-circuit ratio
    • Short circuit of an unloaded alternator
    • Subtransient and transient reactances
    • Negative and zero sequence reactances of synchronous machines
  5. Unit 5: Special Machines

    The permanent-magnet synchronous motor, switched reluctance motor, stepper motor and BLDC motors used for electric-vehicle propulsion; servo motors in automation; applications in robotics and renewable energy systems.

    Examined in the 70-mark end-semester paper

    • PMSM and BLDC configurations
    • Switched reluctance motor
    • Stepper motors
    • BLDC motors
    • AC servo motors

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).