RTMNU TY Electrical syllabus

RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020

Digital Electronics Circuits

BEL5T16C · Elective I · Semester V · 4 credits · College 30 + university 70

One of the Elective I options. Program Elective I: 4 credits (3 lectures + 1 tutorial).

  1. Unit 1: Fundamentals of Digital Systems and Logic Families

    10 hours

    Binary, signed binary, octal and hexadecimal numbers, one's and two's complement arithmetic and codes; basic gates, NAND, NOR, XOR and XNOR operations and gate ICs; RTL, TTL and CMOS logic families and interfacing CMOS with TTL.

    Examined in the 70-mark end-semester paper

    • Number systems and codes
    • Binary arithmetic with 1's and 2's complement
    • TTL NAND gate and its characteristics
    • MOS and CMOS logic
    • RTL, DTL and ECL
    • Interfacing logic families
  2. Unit 2: Logic Functions and Minimisation

    7 hours

    Boolean algebra and minimisation of logic functions; standard representations; Karnaugh maps up to four variables and don't-care conditions.

    Examined in the 70-mark end-semester paper

    • Boolean algebra
    • SOP and POS reduction
    • Karnaugh maps
  3. Unit 3: Combinational Digital Circuits

    9 hours

    Multiplexers, demultiplexers, decoders, adders, subtractors, code converters, priority encoders, and decoder/drivers for seven-segment displays.

    Examined in the 70-mark end-semester paper

    • Multiplexers and demultiplexers
    • Encoders and decoders
    • Half and full adders
    • Code converters and comparators
  4. Unit 4: Sequential Circuits and Systems

    9 hours

    The one-bit memory and bistable latch; clocked SR, JK, T and D flip-flops, excitation tables and conversions; SIPO and PIPO shift registers; ripple and synchronous counters up to four bits, the ring counter, and counter applications such as traffic-light control.

    Examined in the 70-mark end-semester paper

    • Latches and flip-flops
    • Shift registers
    • Asynchronous counters
    • Synchronous counter design
    • Ring and twisted-ring counters
  5. Unit 5: Converters and Semiconductor Memories

    10 hours

    Weighted-resistor and R-2R ladder D/A converters and DAC ICs; successive-approximation, counting and dual-slope A/D converters and ADC ICs; memory organisation, expansion, classes and characteristics; PLA, PAL and ROM/PROM.

    Examined in the 70-mark end-semester paper

    • ADC and DAC: ADC0808 and DAC0808
    • Semiconductor memories: RAM, ROM and flash
    • PLA and PAL

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).