RTMNU TY Electrical syllabus

RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020

Control System

BEL6T19 · Semester VI · 4 credits · College 30 + university 70

4 credits (3 lectures + 1 tutorial).

  1. Unit 1: Introduction to Control Systems

    10 hours

    Open- and closed-loop control; actuators and sensors; DC and AC servomotors, potentiometers and synchros; mathematical models of mechanical, electrical and electromechanical systems; transfer functions, block diagram reduction and signal flow graphs.

    Examined in the 70-mark end-semester paper

    • Open-loop and closed-loop systems
    • AC servo motors
    • Synchros, tachogenerators and encoders
    • Modelling electrical and mechanical systems
    • Transfer function, poles and zeros
    • Block diagram reduction
    • Signal flow graphs and Mason's gain formula
  2. Unit 2: Time-Domain Analysis

    9 hours

    Transient and steady-state response, standard test signals, type and order of a system; steady-state error and static error constants; time response of first- and second-order systems and their specifications; PD, PI and PID controllers.

    Examined in the 70-mark end-semester paper

    • Standard test signals
    • Response of first-order systems
    • Response of second-order systems
    • Time-domain specifications
    • Steady-state error and error coefficients
    • P, PI and PID controllers
  3. Unit 3: Stability Analysis and Root Locus

    10 hours

    Stability, its conditions and the characteristic equation; the Routh-Hurwitz criterion and its special cases; root location and time response; the root locus and the effect of adding poles and zeros.

    Examined in the 70-mark end-semester paper

    • Stability and pole locations
    • Routh-Hurwitz criterion
    • Root locus construction
    • Stability from the root locus
  4. Unit 4: Frequency-Domain Analysis

    9 hours

    Frequency response; Bode plots, stability margins and closed-loop stability from the open-loop response; the effect of gain and of added poles and zeros; polar plots and an introduction to the Nyquist criterion.

    Examined in the 70-mark end-semester paper

    • Frequency-domain specifications
    • Bode plots
    • Gain margin and phase margin
    • Polar plots
    • Nyquist stability criterion
  5. Unit 5: State Variable Analysis

    7 hours

    State, state variables and the state model; state models from transfer functions using physical variables, phase-variable and canonical forms; state diagrams; transfer functions from state models; stability from the eigenvalues of the state model.

    Examined in the 70-mark end-semester paper

    • State variables and state-space representation
    • State equations from transfer functions
    • Eigenvalues, eigenvectors and diagonalisation

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).