RTMNU · Third Year B.Tech Civil Engineering · NEP 2020
Fluid Mechanics
BCV5T16 · Semester V · 3 credits · College 30 + university 70
Unit 1: Fluid Properties and Measurement of Fluid Pressure
9 hoursDensity, specific weight and gravity, viscosity and Newton's law, the rheological diagram, ideal and real fluids, compressibility, surface tension and capillarity; pressure variation with depth, pressure head, atmospheric, gauge and absolute pressure, U-tube and differential manometers.
Examined in the 70-mark end-semester paper
- Properties of fluids
- Viscosity and Newton's law of viscosity
- Surface tension and capillarity
- Pressure and its measurement
Unit 2: Hydrostatics and Buoyancy
7 hoursTotal pressure and centre of pressure on vertical, inclined and curved surfaces, fluid masses under horizontal, vertical and inclined acceleration; buoyancy, metacentric height by analytical and experimental methods and the stability of floating bodies.
Examined in the 70-mark end-semester paper
- Total pressure and centre of pressure
- Pressure on curved surfaces
- Liquids in relative equilibrium
- Buoyancy and metacentric height
Unit 3: Kinematics and Kinetics of Flow
9 hoursTypes of flow, velocity and acceleration, continuity in Cartesian coordinates, stream function, velocity potential and flow nets; Bernoulli's equation for ideal and real fluids, the momentum equation, and discharge measurement by venturimeter, orifices, mouthpieces and notches.
Examined in the 70-mark end-semester paper
- Continuity equation
- Velocity potential and stream function
- Flow nets
- Euler's equation and Bernoulli's equation
- Momentum equation and its applications
- Venturimeter and orifice meter
- Orifices and mouthpieces
- Notches and weirs
Unit 4: Elements of Flow through Pipes
7 hoursMinor losses, friction and the Darcy–Weisbach equation, hydraulic and energy gradients, pipes in series, parallel and branched connections, siphons, power transmission through pipes and the Hardy Cross method.
Examined in the 70-mark end-semester paper
- Minor losses in pipes
- Turbulent flow and Darcy–Weisbach equation
- Hydraulic gradient and energy lines
- Pipes in series and parallel
- Siphons, water hammer and power through nozzles
- Pipe networks: Hardy Cross method
Unit 5: Introduction to Open Channel Flow
8 hoursChannel types and geometry, types of flow, uniform flow by Manning's and Chezy's equations, most economical rectangular, triangular and trapezoidal sections; specific energy, critical depth and the hydraulic jump in horizontal rectangular channels with its energy loss.
Examined in the 70-mark end-semester paper
- Open channel flow and its classification
- Uniform flow: Chezy's and Manning's formulae
- Most economical channel sections
- Specific energy and critical depth
- Froude number and the hydraulic jump
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).