RTMNU TY Civil syllabus

RTMNU · Third Year B.Tech Civil Engineering · NEP 2020

Environmental Engineering

BCV5T17 · Semester V · 2 credits · College 30 + university 70

The syllabus prints 2 credits for this course, although it lists 3 lecture hours a week.

  1. Unit 1: Water Supply System

    7 hours

    Water supply schemes, demand and population forecasting, sources and intake structures, conveyance; characteristics of water and drinking-water standards (WHO 2011, CPHEEO, IS 10500:2016); the conventional treatment flow sheet and sedimentation basins.

    Examined in the 70-mark end-semester paper

    • Water supply schemes and design period
    • Water demand and population forecasting
    • Intake structures
    • Water quality and IS 10500
    • Sedimentation and settling tanks
  2. Unit 2: Treatment Process of Water Purification

    6 hours

    Coagulation and flocculation, coagulants and clariflocculators; filtration mechanism, rapid sand, slow sand and pressure filters with simple design, membrane filtration; disinfection by chlorination; distribution systems and layouts.

    Examined in the 70-mark end-semester paper

    • Coagulation and flocculation
    • Rapid sand filters
    • Slow sand and pressure filters
    • Membrane filtration
    • Disinfection and chlorination
    • Water distribution systems
  3. Unit 3: Wastewater System

    6 hours

    Black and grey water, separate and combined systems and collection patterns, quantity of storm and sanitary wastewater; sewer types, shapes and hydraulic design, construction, appurtenances, testing and maintenance; physical and chemical characteristics, BOD, COD and the BOD rate constant.

    Examined in the 70-mark end-semester paper

    • Separate and combined sewerage systems
    • Quantity of sewage and storm water
    • Design of sewers
    • Sewer construction, appurtenances and maintenance
    • Wastewater characteristics and standards
    • Water quality parameters: BOD, COD and DO
  4. Unit 4: Treatment Process of Wastewater

    7 hours

    Treatment flow sheet and site selection, screens, grit chambers, oil and grease removal and primary settling; biological treatment by activated sludge, trickling filters and oxidation ponds (working principles); disposal standards, sewage farming, self-purification and the oxygen sag curve, sludge digestion and drying beds; rural sanitation, and an introduction to air and noise pollution, climate change, carbon footprint and the SDGs.

    Examined in the 70-mark end-semester paper

    • Screens and grit chambers
    • Skimming tanks and flotation
    • Primary sedimentation tanks
    • Activated sludge process
    • Trickling filters
    • Oxidation ponds and sludge disposal
    • Self-purification of streams
    • Environmental pollution and sustainable development

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).