RTMNU TY Civil syllabus

RTMNU · Third Year B.Tech Civil Engineering · NEP 2020

Design of Reinforced Cement Concrete Structures

BCV5T15 · Semester V · 3 credits · College 30 + university 70

The scan shows the paper's duration corrected by hand from 3 hours to 4 hours.

  1. Unit 1: Introduction; Beams

    8 hours

    Working stress and limit state methods, stress–strain curves of the materials, safety factors, characteristic values and the stress block of IS 456:2000; limit state analysis and design of singly and doubly reinforced, T and L beam sections.

    Examined in the 70-mark end-semester paper

    • Working stress and limit state methods
    • Characteristic loads, strengths and partial safety factors
    • Singly reinforced rectangular sections
    • Doubly reinforced sections
    • Flanged sections
  2. Unit 2: Shear and Torsion

    7 hours

    Limit state design of sections for shear and torsion; bond, anchorage and development length to IS code provisions, with design examples in simply supported and continuous beams and their detailing.

    Examined in the 70-mark end-semester paper

    • Design for shear
    • Bond, development length and torsion
    • Continuous beams by IS code coefficients
    • Detailing continuous beams
  3. Unit 3: Columns

    8 hours

    Short and long columns under axial load, uniaxial and biaxial bending, with IS code provisions.

    Examined in the 70-mark end-semester paper

    • Short columns under axial load
    • Columns with uniaxial and biaxial bending
    • Introduction to long columns
  4. Unit 4: Footings

    8 hours

    Proportioning footings from soil properties; design of wall footings, axially and eccentrically loaded square and rectangular pad and sloped footings, and combined rectangular footings for two columns.

    Examined in the 70-mark end-semester paper

    • Design of wall footings
    • Isolated footings
    • Eccentrically loaded footings
    • Combined footings
  5. Unit 5: Slabs and Staircase

    8 hours

    One-way, two-way and continuous slabs using IS coefficients, limit state of serviceability for deflection and cracking, and the dog-legged staircase.

    Examined in the 70-mark end-semester paper

    • One-way slabs
    • Two-way slabs
    • Cantilever and continuous slabs
    • Serviceability checks for deflection and cracking
    • Dog-legged staircase

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).