RTMNU TY Civil syllabus

RTMNU · Third Year B.Tech Civil Engineering · NEP 2020

Advanced Geotechnical Engineering

BCV5T18B · Elective I · Semester V · 3 credits · College 30 + university 70

One of the Elective I options.

  1. Unit 1: Ground Improvement

    7 hours

    Soil stabilisation with lime, cement and fly ash; reinforced earth and the functions and uses of geosynthetics; vibroflotation, sand drains and preloading.

    Examined in the 70-mark end-semester paper

    • Lime, cement and fly ash stabilisation
    • Reinforced earth
    • Functions of geosynthetics
    • Vibroflotation and vibro-replacement
    • Preloading and sand drains
  2. Unit 2: Lateral Earth Pressure

    8 hours

    Earth pressure at rest, active and passive states, plastic equilibrium; Rankine's and Coulomb's theories, surcharge and submergence; Rebhann's criterion and the Poncelet and Culmann graphical constructions for active pressure.

    Examined in the 70-mark end-semester paper

    • Earth pressure at rest and plastic equilibrium
    • Rankine's earth pressure theory
    • Coulomb's wedge theory
    • Effect of surcharge and submergence on earth pressure
    • Rebhann's, Poncelet's and Culmann's graphical methods
  3. Unit 3: Shallow and Deep Foundations

    8 hours

    Factors affecting bearing capacity, Terzaghi's theory and its limits, types of shear failure, effect of the water table and settlement of shallow foundations; pile classification, cast-in-situ and precast piles, driving and its effects, static and dynamic capacity formulae, pile groups and negative skin friction.

    Examined in the 70-mark end-semester paper

    • Terzaghi's bearing capacity theory
    • Modes of shear failure
    • Effect of water table and eccentricity
    • Settlement of shallow foundations
    • Classification and installation of piles
    • Static capacity of piles
    • Dynamic pile formulae
    • Pile groups and negative skin friction
  4. Unit 4: Grain Morphology; Drainage and Dewatering

    8 hours

    Effect of grain size and shape of sands on engineering properties and stress–strain behaviour; purpose and methods of dewatering, well points, flow towards slots from a line source, and electro-osmosis.

    Examined in the 70-mark end-semester paper

    • Grain size and shape of sands and their behaviour
    • Drainage and dewatering of soil
    • Dewatering and well points
    • Electro-osmotic dewatering
  5. Unit 5: Dynamic Soil Properties and Liquefaction

    8 hours

    Stress conditions on Mohr's circle, measuring dynamic soil properties, stress–strain behaviour and strength of cyclically loaded soil; the phenomenon, evaluation and effects of liquefaction.

    Examined in the 70-mark end-semester paper

    • Dynamic soil properties
    • Field tests for dynamic soil properties
    • Behaviour of soils under cyclic loading
    • Liquefaction of soils
    • Factors affecting liquefaction
    • Liquefaction potential from SPT

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).