RTMNU TY AI & DS syllabus

RTMNU · Third Year B.Tech Artificial Intelligence & Data Science · NEP 2020

Digital System Design using HDL

BAD6T24 · Elective III · Semester VI · 3 credits · College 30 + university 70

One of the Elective III options.

All notes for this subject
  1. Unit 1: Introduction to Verilog

    6 hours

    Verilog as an HDL, levels of design description, concurrency, simulation and synthesis, functional verification, system tasks, the PLI, simulation and synthesis tools and test benches; keywords, identifiers, numbers, strings, logic values, strengths, data types, scalars and vectors, parameters and operators.

    Examined in the 70-mark end-semester paper

    • Verilog design flow and methodology
    • Simulation, synthesis and test benches
    • Verilog data types and number representation
    • Verilog operators
  2. Unit 2: Gate-Level and Dataflow Modeling

    8 hours

    Gate primitives and module structure, tri-state gates, arrays of instances, flip-flops from gate primitives, delays, strength and contention resolution, net types; dataflow modelling with continuous assignments, delays and assignment to vectors.

    Examined in the 70-mark end-semester paper

    • Gate-level modelling and delays
    • Dataflow modelling and continuous assignment
  3. Unit 3: Behavioral Modeling

    8 hours

    Initial and always constructs, behavioural models of flip-flops and latches, assignments with delays, wait, multiple always blocks, blocking and non-blocking assignments, case and if–else, assign–deassign, repeat, for, while and forever loops, disable, parallel blocks, force–release and events.

    Examined in the 70-mark end-semester paper

    • Behavioural modelling: initial and always blocks
    • Blocking and non-blocking assignments
    • if–else and case statements
    • Timing control and loop statements in Verilog
    • Procedural continuous assignments: assign–deassign and force–release
  4. Unit 4: Synthesis of Digital Sub-systems

    6 hours

    Synthesis of combinational logic, of sequential logic with latches and flip-flops, of three-state devices and bus interfaces, of explicit and implicit state machines, registered logic, state encoding, registers and counters.

    Examined in the 70-mark end-semester paper

    • Synthesis of combinational and sequential logic
    • Moore and Mealy FSMs in Verilog
    • Counters and shift registers in Verilog
  5. Unit 5: System Implementation and User-Defined Primitives

    8 hours

    PLAs, PALs and the programmability of PLDs, CPLDs, FPGAs and their role in the ASIC market, FPGA technologies, Verilog-based design flows for FPGAs and ASICs, and comparison of CPLD, FPGA and ASIC implementations.

    Examined in the 70-mark end-semester paper

    • PLA, PAL and programmable logic devices
    • CPLD and FPGA architecture
    • FPGA design flow
    • Switch-level modelling and user-defined primitives

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).