RTMNU · Third Year B.Tech Artificial Intelligence · NEP 2020
Microcontrollers
BMD5T19 · Semester V · 3 credits · College 30 + university 70
The programme's multidisciplinary-minor (MDM-III) course, taught by the Electronics board.
Unit 1: 8051 Architecture
6 hoursThe 8051's hardware, oscillator and clock, program counter and data pointer, registers, stack and stack pointer, special function registers, program and data memory, I/O ports, external memory, counters and timers, serial I/O and interrupts.
Examined in the 70-mark end-semester paper
- 8051 architecture and register set
- 8051 pin diagram and port structure
- 8051 memory organisation
- External memory, reset and clock circuits for the 8051
- 8051 timers, counters and delay generation
- 8051 interrupts and serial communication
Unit 2: 8051 Programming
6 hoursThe structure of assembly language, assembling and running programs, data transfer and addressing modes, arithmetic, logical, branching and bit-level instructions, I/O port programming, timers and counters, interrupt programming, and 8051 programming in C.
Examined in the 70-mark end-semester paper
- 8051 addressing modes and instruction set
- 8051 assembly programming
- Lookup tables and time-delay calculation
- 8051 interrupt priority and programming
- Embedded C basics
Unit 3: Peripheral Interfacing
8 hoursMemory, seven-segment LED, LCD and keyboard interfacing, ADC and DAC, relays, stepper and DC motors, sensors, and application programs.
Examined in the 70-mark end-semester paper
- Interfacing LEDs, relays and buzzers with the 8051
- Interfacing LCD and seven-segment displays with the 8051
- Interfacing stepper motors, keyboards and DACs with the 8051
- Interfacing ADCs and temperature sensors with the 8051
Unit 4: Development Tools and the AVR
8 hoursThe IDE and its editor, linker, loader, debugger, simulator and emulator; the AVR's instruction set, formats, assembler directives and addressing modes, AVR assembly programming, cross compilers, in-system programming and delay programs.
Examined in the 70-mark end-semester paper
- Hardware and JTAG debugging, simulators and emulators
- Assemblers and assembler directives
- AVR architecture, addressing modes and instruction set
- AVR assembly programming and in-system programming
Unit 5: Advanced Microcontrollers
8 hoursARM and PIC processors, the 16-bit MSP430's features, architecture, addressing modes and low-power features, Embedded C, and the Arduino platform with its digital and analog ports.
Examined in the 70-mark end-semester paper
- ARM7, ARM9 and ARM11 compared
- PIC microcontroller and its families
- MSP430 architecture, addressing modes and low-power modes
- Arduino board and programming
- Embedded C basics
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).