RTMNU SY Mechanical syllabus

RTMNU · Second Year B.Tech Mechanical Engineering · NEP 2020

Engineering Thermodynamics

BME4T11 · Semester IV · 3 credits · College 30 + university 70

  1. Unit 1: Basic Concepts and Ideal Gases

    9 hours

    Systems, properties, state and process, path and point functions, equilibrium and the zeroth law; heat and work; the ideal gas laws and the equation of state; heat, work and changes in internal energy and enthalpy in constant-pressure, constant-volume, isothermal, isentropic and polytropic processes.

    Examined in the 70-mark end-semester paper

    • Thermodynamic systems, properties and processes
    • Point and path functions and PdV work
    • Zeroth law and temperature measurement
    • Heat and work
    • Ideal gas laws and the equation of state
    • Ideal gas processes: heat, work and internal energy
  2. Unit 2: First Law of Thermodynamics

    9 hours

    The first law for closed systems undergoing a process and a cycle, and for open systems; the steady-flow energy equation applied to compressors, turbines, boilers, nozzles, throttling devices and heat exchangers.

    Examined in the 70-mark end-semester paper

    • First law for closed systems and cycles
    • Flow work and non-flow work
    • Steady-flow energy equation and its applications
  3. Unit 3: Second Law and Entropy

    8 hours

    Reservoirs, heat engines, refrigerators and heat pumps, the Kelvin–Planck and Clausius statements, PMM-I and PMM-II, the Carnot cycle; the Clausius inequality, entropy, the principle of increase of entropy and entropy change in processes.

    Examined in the 70-mark end-semester paper

    • Heat engines, refrigerators and heat pumps
    • Kelvin–Planck and Clausius statements
    • Equivalence of the statements and PMM-II
    • Carnot cycle and Carnot's theorem
    • Clausius inequality and entropy
    • Principle of increase of entropy
    • Entropy change of an ideal gas
  4. Unit 4: Properties of Steam

    9 hours

    Formation of steam and its properties — sensible and latent heat, critical and triple points, wet, dry and superheated steam, dryness fraction, enthalpy and internal energy — the T-s diagram and Mollier chart, and heat and work in steam processes using steam tables.

    Examined in the 70-mark end-semester paper

    • Formation of steam and its properties
    • Property diagrams of water
    • Steam tables and the Mollier chart
    • Dryness fraction and calorimeters
    • Vapour processes
  5. Unit 5: Power Cycles

    8 hours

    The Otto, Diesel and Brayton cycles on p-v and T-s diagrams, work, heat, air-standard efficiency and mean effective pressure, comparison of the Otto, Diesel and dual cycles, and an introduction to the Rankine cycle.

    Examined in the 70-mark end-semester paper

    • Mean effective pressure and air-standard assumptions
    • Otto, Diesel and dual cycles
    • Brayton cycle
    • Carnot and Rankine cycles

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).