RTMNU SY E&TC syllabus

RTMNU · Second Year B.Tech Electronics & Telecommunication Engineering · NEP 2020

Microcontroller and Application

BET4T11 · Semester IV · 3 credits · College 30 + university 70

  1. Unit 1: Introduction to 8051 Architecture

    8 hours

    The 8051's hardware, oscillator and clock, program counter and data pointer, registers, stack and stack pointer, special function registers, program and data memory, I/O ports, external memory, counters and timers, serial I/O and interrupts.

    Examined in the 70-mark end-semester paper

    • 8051 architecture and register set
    • 8051 pin diagram and port structure
    • 8051 memory organisation
    • External memory, reset and clock circuits for the 8051
    • 8051 timers, counters and delay generation
    • 8051 interrupts and serial communication
  2. Unit 2: 8051 Programming in Assembly Language

    7 hours

    The structure of 8051 assembly programs, assembling and running them, data movement and addressing modes, arithmetic, logical, branching, I/O-port and bit-level programs, timer, counter and interrupt programming, and 8051 programming in C.

    Examined in the 70-mark end-semester paper

    • 8051 addressing modes and instruction set
    • 8051 assembly programming
    • Lookup tables and time-delay calculation
    • 8051 interrupt priority and programming
    • Embedded C basics
  3. Unit 3: Applications of 8051 Microcontroller

    7 hours

    Memory interfacing; seven-segment LED, LCD and keyboard interfacing; ADC, DAC, relay and stepper-motor interfacing, DC motor control, and sensor application programs.

    Examined in the 70-mark end-semester paper

    • Interfacing LEDs, relays and buzzers with the 8051
    • Interfacing LCD and seven-segment displays with the 8051
    • Interfacing stepper motors, keyboards and DACs with the 8051
    • Interfacing ADCs and temperature sensors with the 8051
    • Data acquisition system with the 8051
  4. Unit 4: Integrated Development Environment for Microcontrollers

    7 hours

    The IDE: editor, linker, loader, debugger, simulator and emulator; the AVR's instruction set and formats, assembler directives and addressing modes, basic AVR assembly programming, cross-compilers, in-system programming and a delay-generation program.

    Examined in the 70-mark end-semester paper

    • Hardware and JTAG debugging, simulators and emulators
    • Assemblers and assembler directives
    • AVR architecture, addressing modes and instruction set
    • AVR assembly programming and in-system programming
  5. Unit 5: Introduction to Other Advanced Microcontrollers

    7 hours

    An introduction to ARM and PIC processors and the 16-bit MSP430: features, architecture, addressing modes and low-power operation; Embedded C and the Arduino platform with its digital and analog ports.

    Examined in the 70-mark end-semester paper

    • ARM7, ARM9 and ARM11 compared
    • PIC microcontroller and its families
    • MSP430 architecture, addressing modes and low-power modes
    • ATmega328, LPC2148, MSP430 and STM32 compared
    • Introduction to the Arduino family
    • Embedded C basics

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).