RTMNU SY E&TC syllabus

RTMNU · Second Year B.Tech Electronics & Telecommunication Engineering · NEP 2020

Analog and Digital Communication

BET4T12 · Semester IV · 3 credits · College 30 + university 70

  1. Unit 1: Amplitude Modulation

    7 hours

    A review of signals and systems and the need for modulation; amplitude modulation, DSB-SC, SSB and VSB transmission, modulation index, spectrum and power, and the AM transmitter.

    Examined in the 70-mark end-semester paper

    • Need for modulation and amplitude modulation
    • AM spectrum, modulation index and power
    • DSB-SC modulation
    • SSB and VSB modulation
    • Generation of AM: low and high-level modulation
  2. Unit 2: Angle Modulation and Pulse Modulation

    8 hours

    Frequency modulation, its modulation index and spectrum, pre-emphasis and de-emphasis, the FM transmitter, phase modulation and its spectrum; generation and demodulation of PAM, PWM and PPM.

    Examined in the 70-mark end-semester paper

    • Frequency modulation and modulation index
    • FM spectrum, Bessel functions and Carson's rule
    • Pre-emphasis and de-emphasis
    • FM generation: Armstrong's method
    • Phase modulation and its relation to FM
    • PAM, PWM and PPM
  3. Unit 3: Noise and Receivers

    8 hours

    Sources of noise, shot and thermal noise, noise calculations and equivalent noise bandwidth; the TRF and superheterodyne receivers, receiver sensitivity, selectivity, fidelity and image rejection, AM detectors and FM discriminators.

    Examined in the 70-mark end-semester paper

    • Sources and types of noise
    • Noise calculations and noise figure
    • TRF and superheterodyne receivers
    • Receiver characteristics: sensitivity, selectivity, fidelity and image rejection
    • Practical diode detector
    • Foster–Seeley discriminator
    • Slope and ratio detectors
  4. Unit 4: Digital Modulation Concepts

    8 hours

    The digital communication system, sampling, pulse code modulation and delta modulation, the matched-filter receiver and probability of error; BPSK, BFSK, QPSK, MSK and DPSK.

    Examined in the 70-mark end-semester paper

    • Sampling theorem and types of sampling
    • Pulse code modulation
    • Delta and adaptive delta modulation
    • Matched filter
    • Error probability of digital modulations
    • BASK, BFSK and BPSK
    • QPSK, OQPSK and M-ary PSK
    • QASK and MSK
  5. Unit 5: Source Coding, Channel Coding and Spread Spectrum Methods

    8 hours

    The source coding theorem and Huffman coding; convolutional codes, their distance properties, and Viterbi and Fano decoding; PN sequences, direct-sequence and slow and fast frequency-hopping spread spectrum and their applications, CDMA and OFDM.

    Examined in the 70-mark end-semester paper

    • Entropy and information
    • Huffman and Shannon–Fano coding
    • Convolutional codes
    • Pseudo-noise sequences
    • Direct-sequence spread spectrum
    • Frequency-hop spread spectrum and jamming
    • SDMA, TDMA, FDMA and CDMA
    • Multicarrier modulation and OFDM

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).