RTMNU SY Electrical syllabus

RTMNU · Second Year B.Tech Electrical Engineering · NEP 2020

Renewable Energy Sources

BEL3T10 · Semester III · 3 credits · College 30 + university 70

The syllabus prints no hours for Unit 5.

  1. Unit 1: Solar Radiation and Its Measurement

    6 hours

    The solar constant, solar radiation at the earth's surface and its geometry, measuring and estimating average solar radiation, and radiation on tilted surfaces.

    Examined in the 70-mark end-semester paper

    • Solar radiation and solar angles
    • Solar radiation measurement: pyranometer and pyrheliometer
    • Radiation on tilted surfaces
  2. Unit 2: Solar Photovoltaic Power Generation

    6 hours

    Solar cell physics and characteristics, series and parallel connection, cell types and module manufacturing, partial shading with bypass and blocking diodes, load and panel calculations, rooftop system rating, stand-alone PV with battery, grid-connected PV with net metering, and MPPT.

    Examined in the 70-mark end-semester paper

    • Solar cell I-V and P-V characteristics
    • Types of solar cells and PV module manufacturing
    • Partial shading, bypass and blocking diodes
    • Factors affecting PV array design
    • Solar PV system design
    • Grid-connected solar PV
    • Net metering
    • Maximum power point tracking
  3. Unit 3: Applications of Solar Energy

    6 hours

    Solar water and space heating, space cooling and thermal heat conversion, solar cooking, solar water pumping for agriculture and sizing the setup it needs, solar greenhouses, and hydrogen production from solar energy.

    Examined in the 70-mark end-semester paper

    • Solar thermal applications: water heating, drying and cooling
    • Solar cookers and solar greenhouses
    • Solar water pumping and its sizing
    • Hydrogen production and storage
  4. Unit 4: Wind Energy

    6 hours

    Principles of wind energy conversion, wind data and energy estimation, site selection, the components and classification of wind energy conversion systems, generating systems, storage and applications, and stand-alone and grid-connected wind-electric systems.

    Examined in the 70-mark end-semester paper

    • Power in the wind and the Betz limit
    • Site and turbine selection
    • Components and classification of wind energy conversion systems
    • Horizontal and vertical-axis wind machines
    • Wind turbine characteristics
    • Wind generators
    • Grid-connected wind systems
  5. Unit 5: Other Non-Conventional Energy Sources

    Operating principles only: MHD generation, fuel cells, ocean energy and OTEC with the Claude, Anderson and hybrid cycles, and tidal energy with the energy and power of a simple single-basin system.

    Examined in the 70-mark end-semester paper

    • MHD and thermionic generation
    • Fuel cells
    • OTEC and tidal energy

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).