RTMNU · Second Year B.Tech Electrical Engineering · NEP 2020
Power Systems-I
BEL4T12 · Semester IV · 3 credits · College 30 + university 70
Unit 1: Evolution of the Structure of Power Systems
8 hoursPower system structure, generation, transmission and distribution today, smart grids and microgrids, standard transmission voltages, overhead and underground systems, EHVAC versus HVDC and HVDC components, radial, ring-main and interconnected distribution, feeders and distributors, and substations.
Examined in the 70-mark end-semester paper
- Structure of a power system
- Smart grid concept and drivers
- Microgrid architecture
- Choice of transmission voltage
- HVDC versus EHVAC transmission
- Components of an HVDC system
- Classification and requirements of distribution systems
- Substation equipment and their ratings
Unit 2: Per-Unit Representation
6 hoursModels and parameters of generators, transformers, lines and loads, voltage and frequency dependence of loads, the single-line impedance diagram, and the advantages of per-unit representation.
Examined in the 70-mark end-semester paper
- Single-line and reactance diagrams
- Per-unit system and change of base
- Load models: voltage and frequency dependence
Unit 3: Overhead Transmission Lines and Cables
8 hoursLine components and conductors, skin and proximity effects, corona, transposition and bundled conductors, insulators and string efficiency, inductance and capacitance of a single-phase line with self and mutual GMD, insulated cables, dielectric stress, grading and XLPE cables.
Examined in the 70-mark end-semester paper
- Conductor materials: copper and ACSR
- Skin and proximity effects
- Corona and corona loss
- String efficiency
- GMR and GMD
- Inductance of a single-phase line
- Capacitance of a single-phase line
- Grading of cables
Unit 4: Performance of Transmission Lines
8 hoursShort, medium (nominal T and pi) and long lines, regulation and efficiency, generalised ABCD constants, the Ferranti effect, surge impedance loading, and series and shunt compensation with capacitors.
Examined in the 70-mark end-semester paper
- Classification of transmission lines
- Nominal-T and nominal-pi models
- Long transmission lines
- ABCD constants
- Efficiency and regulation of lines
- Ferranti effect
- Surge impedance loading
- Series and shunt compensation
Unit 5: Load Flow Studies
6 hoursBus classification, forming the bus admittance matrix, static load flow equations, Gauss-Seidel and Newton-Raphson methods (no numericals), frequency and voltage as state indicators, voltage stability, P-V and V-Q curves, and ways to improve voltage stability.
Examined in the 70-mark end-semester paper
- Load flow equations and bus classification
- Formation of the Y-bus matrix
- Gauss-Seidel load flow
- Newton-Raphson load flow
- PV and QV curves
- Voltage stability analysis and indices
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).