RTMNU · Second Year B.Tech Electrical Engineering · NEP 2020
Network Analysis
BEL3T09 · Semester III · 3 credits · College 30 + university 70
Unit 1: Electric Circuit Elements
7 hoursIdeal and practical, dependent and independent voltage and current sources, source transformation, duality, and series and parallel combinations of inductors and capacitors.
Examined in the 70-mark end-semester paper
- Independent and dependent sources
- Source transformation
- Duality
- Series and parallel inductors and capacitors
Unit 2: Nodal and Mesh Analysis
7 hoursMesh analysis and the supermesh, the mesh-basis equilibrium approach for simple networks with mutual coupling, nodal analysis and the supernode, and choosing between nodal and mesh analysis.
Examined in the 70-mark end-semester paper
- Mesh analysis and supermesh
- Nodal analysis and supernode
- Dot convention for coupled circuits
- Magnetically coupled circuits
Unit 3: Network Theorems
7 hoursSuperposition, Thevenin's, Norton's, maximum power transfer and reciprocity theorems applied to DC and AC circuits.
Examined in the 70-mark end-semester paper
- Superposition theorem
- Thevenin's and Norton's theorems
- Maximum power transfer theorem
- Reciprocity and Millman's theorems
- Network theorems with AC sources
Unit 4: Electric Circuit Analysis using Laplace Transforms
7 hoursReview of the Laplace transform and waveform synthesis, circuit analysis for standard inputs, first- and second-order differential equations of series and parallel RLC networks, and networks with and without initial conditions.
Examined in the 70-mark end-semester paper
- Laplace transforms of circuit elements
- Response to step, ramp and exponential inputs
- Initial and final conditions
- Transformed networks with initial conditions
- Solving RLC circuits with Laplace transforms
- Transient response of RL and RC circuits
- Transient response of RLC circuits
Unit 5: Two-Port Networks and Network Functions
8 hoursTwo-port variables, driving-point and transfer functions and their properties, complex frequency, poles and zeros; impedance, admittance, transmission and hybrid parameters and interconnection of two-port networks.
Examined in the 70-mark end-semester paper
- Network functions of one-port and two-port networks
- Poles and zeros of network functions
- Z, Y and transmission parameters
- Hybrid parameters of two-port networks
- Relationships between two-port parameters
- Interconnection of two-port networks
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).