RTMNU · Second Year B.Tech Electrical Engineering · NEP 2020
Electrical Machines-I
BEL4T11 · Semester IV · 3 credits · College 30 + university 70
The syllabus heads Unit II "D.C. Machines" but prints the induction-motor text of Unit III under it; the topics follow the unit title and its course outcome (DC motor characteristics and speed control).
Unit 1: Single-Phase and Three-Phase Transformers
8 hoursPhasor diagrams under load, losses, equivalent circuit, OC and SC tests, regulation, efficiency, maximum and all-day efficiency, polarity test and the autotransformer; three-phase transformer principle, connections and phasor groups, tests and conditions for parallel operation.
Examined in the 70-mark end-semester paper
- Phasor diagrams of a transformer
- Equivalent circuit of a transformer
- Open-circuit and short-circuit tests on transformers
- Voltage regulation of a transformer
- Efficiency and all-day efficiency
- Autotransformers
- Vector groups
- Parallel operation and load sharing
Unit 2: D.C. Machines
7 hoursPrinciple and operation of DC motors and generators, EMF and torque equations, types of DC machines; characteristics and speed control of DC shunt and series motors; losses and efficiency; the need for a starter and the three-point starter; armature reaction; applications.
Examined in the 70-mark end-semester paper
- Construction and EMF equation of DC generators
- Types of DC machines by excitation
- Back EMF and torque equation of DC motors
- Characteristics of DC shunt and series motors
- Speed control of DC motors
- Losses and efficiency of DC machines
- DC motor starters
- Armature reaction and commutation
Unit 3: Three-Phase Induction Motor
7 hoursConstruction, types and principle, torque production and the torque equation, conditions for maximum and starting torque, losses and efficiency, torque-slip characteristics, no-load and blocked-rotor tests, starting methods and applications.
Examined in the 70-mark end-semester paper
- Construction of three-phase induction motors
- Rotating magnetic field and slip
- Torque equation and torque-slip characteristics
- Condition for maximum torque
- Power flow in an induction motor
- No-load and blocked-rotor tests
- Starters for induction motors
Unit 4: Synchronous Machines
7 hoursSalient and cylindrical-rotor generator construction, armature and field windings, winding factors and EMF equation, armature reaction, phasor diagram on load, regulation by the synchronous impedance method; synchronous motor principle, starting, operation on load, effect of excitation, and V and inverted V curves.
Examined in the 70-mark end-semester paper
- Construction of synchronous machines
- EMF equation and winding factors
- Armature reaction
- Synchronous reactance and phasor diagram
- EMF and MMF methods of regulation
- Starting of synchronous motors
- V curves and inverted V curves
Unit 5: Single-Phase Machines
7 hoursSingle-phase induction motor principle and double revolving field theory, shaded-pole, split-phase and capacitor-start capacitor-run motors; principle and applications of the universal, hysteresis, brushless DC and AC series motors.
Examined in the 70-mark end-semester paper
- Double revolving field theory
- Starting methods of single-phase induction motors
- Hysteresis motors
- Brushless DC and stepper motors
- AC series motors
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).