RTMNU SY Civil syllabus

RTMNU · Second Year B.Tech Civil Engineering · NEP 2020

Structural Analysis

BCV4T12 · Semester IV · 3 credits · College 30 + university 70

  1. Unit 1: Statically Indeterminate Structures

    7 hours

    Static indeterminacy, and fixed and continuous beams by the theorem of three moments, including the effect of sinking supports.

    Examined in the 70-mark end-semester paper

    • Static and kinematic indeterminacy
    • Fixed beams
    • Theorem of three moments
    • Lack of fit, support settlement and temperature effects
  2. Unit 2: Analysis of Beams and Frames

    7 hours

    Continuous beams and portal frames by the slope-deflection method, and continuous beams and simple sway and non-sway portal frames by moment distribution.

    Examined in the 70-mark end-semester paper

    • Slope-deflection equations
    • Beams by slope deflection
    • Non-sway frames by slope deflection
    • Sway frames by slope deflection
    • Stiffness, carry-over and distribution factors
    • Beams by moment distribution
    • Non-sway frames by moment distribution
    • Sway frames by moment distribution
  3. Unit 3: Influence Line Diagrams

    7 hours

    Rolling concentrated and uniformly distributed loads on simply supported beams with maximum bending moment and shear; influence lines for reactions, shear and moment in simply supported, cantilever and overhanging beams, and for member forces in simple trusses.

    Examined in the 70-mark end-semester paper

    • Rolling loads and absolute maximum bending moment
    • Influence lines for beams
    • Influence lines for trusses
  4. Unit 4: Matrix Stiffness Method for Beams and Plane Frames

    6 hours

    Degrees of freedom and the direct stiffness method; local and global stiffness matrices for beam and plane frame members, member load matrices for point and distributed loads, transformation, and assembly up to three elements and three degrees of freedom.

    Examined in the 70-mark end-semester paper

    • Flexibility and stiffness concepts
    • Stiffness method: structure and member approaches
    • Beam member stiffness matrix
    • Plane frame member stiffness and transformation
    • Equivalent joint loads
    • Assembling the global stiffness matrix
    • Beams by the stiffness method
    • Portal frames by the stiffness method
  5. Unit 5: Columns and Two-Hinged Arches

    6 hours

    Buckling of columns by Euler's, Rankine's and the secant formulae, and the analysis of two-hinged parabolic arches for shear force and normal thrust.

    Examined in the 70-mark end-semester paper

    • Euler's theory of columns and effective length
    • Rankine's formula
    • Secant formula for eccentrically loaded columns
    • Two-hinged arches

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).