RTMNU · Second Year B.Tech Civil Engineering · NEP 2020
Strength of Materials
BCV3T09 · Semester III · 3 credits · College 30 + university 70
Unit 1: Stress and Strain
7 hoursStress, strain and the stress–strain diagrams of mild steel and TOR steel; simple, compound and composite bars in tension and compression, temperature stresses in restrained composite bars, and the elastic constants and their relations.
Examined in the 70-mark end-semester paper
- Stress, strain and stress–strain diagrams
- Bars of composite sections
- Statically indeterminate bars
- Temperature stresses
- Elastic constants and their relations
Unit 2: Shear Force and Bending Moment
7 hoursTypes of beams, axial force, shear force and bending moment, the relation between load intensity, shear force and bending moment, and SF and BM diagrams of simply supported and cantilever beams.
Examined in the 70-mark end-semester paper
- Shear force and bending moment: concepts and relations
- SFD and BMD for point loads and UDL
- SFD and BMD for UVL and couples
- Points of contraflexure
Unit 3: Stress in Beams
7 hoursSimple bending theory and the relation between bending moment, stress and curvature for homogeneous and composite beams; shear stress, shear flow and its distribution, combined bending and axial force, and an introduction to principal and maximum shear stresses.
Examined in the 70-mark end-semester paper
- Theory of simple bending and the flexure formula
- Bending stress distribution and moment of resistance
- Flitched beams
- Shear stress formula
- Shear stress distribution across sections
- Shear flow and shear centre
- Principal stresses and maximum shear stress
Unit 4: Deflection of Beams
6 hoursThe differential equation of the deflection curve, deflection of simply supported and cantilever beams under concentrated and uniform loads by Macaulay's method and superposition, and beams with overhangs.
Examined in the 70-mark end-semester paper
- Double integration and moment-area methods
- Slope and deflection by Macaulay's method
- Deflection by superposition
Unit 5: Torsion, Direct and Bending Stress
6 hoursDirect and bending stresses; torsional rigidity and the relation between torque, shear stress and angle of twist; torsion of thin-walled hollow sections and closely coiled helical springs.
Examined in the 70-mark end-semester paper
- Direct and bending stresses: eccentric loading
- Torsion of circular shafts
- Power transmitted by shafts
- Torsion of thin-walled hollow sections
- Closely coiled helical springs
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).