RTMNU · Second Year B.Tech Civil Engineering · NEP 2020
Geotechnical Engineering
BCV4T13 · Semester IV · 3 credits · College 30 + university 70
Unit 1: Introduction, Physical and Index Properties of Soil
9 hoursOrigin and formation of soil and weight–volume relationships; in-situ density, moisture content, specific gravity, relative density, Atterberg limits and consistency; particle size distribution by sieving and sedimentation; field identification and the Unified, IS and AASHTO classifications.
Examined in the 70-mark end-semester paper
- Soil formation, structure and clay minerals
- Three-phase system and weight–volume relationships
- Index properties of soil
- Particle size analysis: sieve and sedimentation
- Soil classification systems
Unit 2: Permeability and Seepage
7 hoursDarcy's law, laboratory and field permeability, stratified deposits, Laplace's equation, flow nets, flow through earth dams and uplift; effective stress, seepage force, critical hydraulic gradient and the quick sand condition.
Examined in the 70-mark end-semester paper
- Darcy's law and permeability
- Permeability tests in the laboratory and field
- Permeability of stratified soils
- Laplace equation for 2-D flow
- Flow nets and seepage discharge
- Phreatic line and seepage
- Effective stress principle
- Seepage pressure and quicksand
Unit 3: Consolidation
5 hoursTypes of clay deposits, initial, primary and secondary consolidation, the spring analogy, one-dimensional consolidation test results and Terzaghi's theory.
Examined in the 70-mark end-semester paper
- Primary and secondary consolidation
- Consolidation test
- Terzaghi's one-dimensional consolidation
Unit 4: Compaction
5 hoursMechanism of and factors affecting compaction, standard and modified Proctor tests, field compaction equipment and quality control.
Examined in the 70-mark end-semester paper
- Compaction and Proctor tests
- Field compaction and its control
Unit 5: Shear Strength
7 hoursMohr–Coulomb theory and the laboratory determination of shear parameters by direct shear, triaxial, unconfined compression and vane shear tests; sensitivity and thixotropy of clays.
Examined in the 70-mark end-semester paper
- Mohr–Coulomb failure theory
- Direct shear test
- Triaxial test and drainage conditions
- Unconfined compression and vane shear tests
- Sensitivity and thixotropy
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).