RTMNU SY AI & DS syllabus

RTMNU · Second Year B.Tech Artificial Intelligence & Data Science · NEP 2020

Computer Architecture & Organization

BAD3T11 · Semester III · 3 credits · College 30 + university 70

  1. Unit 1: Functional Blocks and Instruction Cycle

    7 hours

    The CPU, memory, input-output subsystems and control unit; instructions, operations and operands, their representation, logical and control operations; the fetch, decode and execute cycle and addressing modes.

    Examined in the 70-mark end-semester paper

    • Functional units of a computer
    • Instruction set characteristics and operand types
    • The instruction cycle: fetch, decode and execute
    • Addressing modes
  2. Unit 2: Data Representation and Computer Arithmetic

    7 hours

    Fixed- and floating-point representation; integer addition and subtraction with ripple-carry and carry look-ahead adders; shift-and-add and Booth multiplication; restoring and non-restoring division.

    Examined in the 70-mark end-semester paper

    • Fixed- and floating-point representation
    • Ripple-carry and carry look-ahead adders
    • Shift-and-add and Booth multiplication
    • Restoring and non-restoring division
  3. Unit 3: Control Unit Design and Memory Organization

    8 hours

    Hardwired and microprogrammed control; semiconductor memory technologies and memory interleaving; the memory hierarchy; cache size versus block size, cache mapping functions, replacement algorithms and write policies.

    Examined in the 70-mark end-semester paper

    • Hardwired control unit
    • Microprogrammed control unit
    • Semiconductor memory and memory interleaving
    • The memory hierarchy
    • Cache memory and mapping functions
    • Cache replacement and write policies
  4. Unit 4: Input-Output Organization

    7 hours

    Input-output subsystems; program-controlled and interrupt-driven transfers and DMA; software interrupts and exceptions; I/O device interfaces such as USB.

    Examined in the 70-mark end-semester paper

    • I/O subsystems and programmed I/O
    • Interrupts and DMA
    • Software interrupts and exceptions
    • USB and I/O device interfaces
  5. Unit 5: Parallel Processing and Pipelining

    7 hours

    Parallel processing concepts, concurrent access to memory and cache coherence; pipelining, throughput and speedup; pipeline hazards and their solutions.

    Examined in the 70-mark end-semester paper

    • Flynn's taxonomy
    • Shared memory and cache coherence
    • Instruction pipelining: throughput and speedup
    • Pipeline hazards and their solutions

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).