RTMNU Final Mechanical syllabus

RTMNU · Final Year B.Tech Mechanical Engineering · CBCS

Refrigeration & Air-conditioning

BEME802TC · Elective IV · Semester VIII · 3 credits · College 30 + university 70

One of the Elective IV options.

  1. Unit 1: Vapour Compression and Air Refrigeration

    8 hours

    The vapour compression cycle from the reversed Carnot cycle, superheating and subcooling; refrigerants and the Montreal and Kyoto protocols, eco-friendly and secondary refrigerants; compressors, evaporators, condensers and expansion devices; air cycles — bootstrap, regenerative and reduced ambient.

    Examined in the 70-mark end-semester paper

    • Vapour compression cycle
    • Effect of operating conditions on the VCC
    • Refrigerants: designation, ODP and GWP
    • Secondary refrigerants, zeotropes and azeotropes
    • Refrigerant compressors
    • Condensers
    • Expansion devices
    • Bootstrap and regenerative air refrigeration
  2. Unit 2: Absorption, Other and Compound Systems

    7 hours

    Aqua-ammonia and Li-Br absorption, steam-jet, thermoelectric and vortex-tube refrigeration; compound, multi-compressor and multi-evaporator systems with analysis.

    Examined in the 70-mark end-semester paper

    • Vapour absorption refrigeration
    • Lithium bromide–water absorption system
    • Steam-jet, thermoelectric and vortex-tube refrigeration
    • Multistage compression with flash intercooling
    • Multi-evaporator systems
  3. Unit 3: Psychrometry and Load Calculation

    8 hours

    Psychrometric properties and processes, classes of air-conditioning systems, thermal comfort; sources of heat gain and loss, design conditions and methods of cooling and heating load calculation.

    Examined in the 70-mark end-semester paper

    • Psychrometric properties of air
    • Psychrometric processes and the chart
    • Thermal comfort and indoor air quality
    • Cooling load estimation
  4. Unit 4: Air Distribution and AC Systems

    8 hours

    Room air distribution, grilles, diffusers and filters, duct losses and design methods, clean rooms, fans; unitary, central, all-air, all-water, air–water and VRF systems, chilled ceilings and beams, displacement ventilation, evaporative cooling and desiccant dehumidification.

    Examined in the 70-mark end-semester paper

    • Room air diffusion and filtration
    • Duct design methods
    • Air distribution and fans
    • Modern HVAC systems
    • VRF and VAV systems
    • Desiccant air conditioning
    • Clean rooms and radiant cooling
  5. Unit 5: Air-Conditioning System Design and Controls

    7 hours

    Designing and selecting systems for commercial buildings, supermarkets, hospitals and restaurants; sensing and actuating elements, motors and controls, part-load control and inverter and dual-inverter units.

    Examined in the 70-mark end-semester paper

    • Air-conditioning system design for buildings
    • Air-conditioning controls, part-load operation and inverters

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).