RTMNU Final Mechanical syllabus

RTMNU · Final Year B.Tech Mechanical Engineering · CBCS

Heating Ventilation and Air-conditioning

BEME803TA · Elective V · Semester VIII · 3 credits · College 30 + university 70

One of the Elective V options.

  1. Unit 1: Fundamentals of HVAC

    8 hours

    HVAC systems and components, the design procedure, air-handling units and their functions, sound and vibration control, the scope of the HVAC industry and its codes and standards.

    Examined in the 70-mark end-semester paper

    • HVAC systems and the design procedure
    • Air-handling units and their components
    • Sound and vibration control in HVAC
    • HVAC codes and standards
    • Year-round air conditioning systems
  2. Unit 2: Cooling and Heating Load Calculations

    8 hours

    Outdoor and indoor design conditions and thermal comfort, internal heat sources, transient building heat transfer, and cooling and heating load calculation methods (numerical).

    Examined in the 70-mark end-semester paper

    • Inside and outside design conditions
    • Thermal comfort
    • Internal heat gains and transient building heat transfer
    • Cooling load estimation
    • Sol-air temperature and CLTD
    • Heating load calculation
  3. Unit 3: Air Distribution Systems

    8 hours

    Total pressure distribution, fans, fan–duct interaction, duct design and optimisation, and air distribution in zones (numerical).

    Examined in the 70-mark end-semester paper

    • Fan laws and fans
    • Friction loss in ducts and equivalent diameter
    • Duct design methods
    • Fan–duct interaction and duct system optimisation
    • Room air diffusion and filtration
  4. Unit 4: Water Distribution Systems

    8 hours

    The energy equation and head losses in hydronic systems, pump characteristics, system–pump interaction and flow control, and design of water distribution systems (numerical).

    Examined in the 70-mark end-semester paper

    • Hydronic systems: energy equation and head losses
    • Pump–system interaction and flow control in hydronic systems
    • Design of chilled and hot water distribution systems
    • Series and parallel pumps
  5. Unit 5: Building Energy Estimating and Modelling

    8 hours

    The degree-day and bin methods and simulation methods for estimating building energy use (numerical).

    Examined in the 70-mark end-semester paper

    • Degree-day method for building energy use
    • Bin method for building energy use
    • Building energy simulation

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).