RTMNU Final E&TC syllabus

RTMNU · Final Year B.Tech Electronics & Telecommunication Engineering · CBCS

Satellite Communication

BEETC802PE · Elective VII · Semester VIII · 4 credits · College 30 + university 70

One of the Elective VII options.

  1. Unit 1: Introduction, Orbits and Spacecraft Subsystems

    9 hours

    The origin and current state of satellite communication; orbital mechanics, the orbit equation, locating a satellite, orbital elements and perturbations; attitude and orbit control, telemetry, tracking and command, power and communication subsystems.

    Examined in the 70-mark end-semester paper

    • Orbital elements and Kepler's laws
    • Orbital perturbations
    • Look angles and visibility
    • Satellite subsystems
    • On-board computer, telemetry and telecommand
  2. Unit 2: Satellite Link Design

    9 hours

    System noise temperature and G/T ratio; downlink and uplink design; domestic satellite systems; designing a link for a specified C/N.

    Examined in the 70-mark end-semester paper

    • System noise temperature and C/N ratio
    • EIRP and link budget
    • Uplink and downlink rain-fade margins
  3. Unit 3: Multiple Access Techniques

    10 hours

    FDMA, FDM/FM/FDMA and intermodulation; TDMA, its frame structure, synchronisation and timing; CDMA and spread-spectrum transmission; on-board processing, digital speech interpolation and DAMA.

    Examined in the 70-mark end-semester paper

    • Satellite multiple access: TDMA, FDMA, CDMA and SDMA
    • TDMA frame structure and synchronisation
    • DAMA and on-board processing
  4. Unit 4: Propagation on Satellite Paths

    10 hours

    Earth-path propagation effects — atmospheric absorption, scintillation, land and sea multipath, rain and ice; rain-drop distribution and attenuation; rain effects on antenna noise temperature.

    Examined in the 70-mark end-semester paper

    • Atmospheric and rain losses
    • Polarisation and depolarisation
    • Scintillation and multipath on satellite paths
  5. Unit 5: Error Control and Earth Station Technology

    10 hours

    Channel capacity, error-detecting codes, linear block, cyclic, BCH and convolutional codes and their performance, and error detection on satellite links; earth station design, antenna tracking, LNA, HPA, RF multiplexing and orbit utilisation.

    Examined in the 70-mark end-semester paper

    • Linear block codes
    • Convolutional codes
    • Error control on satellite links
    • Earth station design

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).