RTMNU Final E&TC syllabus

RTMNU · Final Year B.Tech Electronics & Telecommunication Engineering · CBCS

Robotics & Automation

BEETC701PE-T · Elective III · Semester VII · 4 credits · College 30 + university 70

One of the Elective III options.

  1. Unit 1: Fundamentals of Robotics

    8 hours

    Automation and robotics and their applications; robot anatomy and configurations, joint types, wrists and joint notation, work volume, robot specifications and an introduction to arm dynamics.

    Examined in the 70-mark end-semester paper

    • Types of automation and Industry 4.0
    • Types of robots and robot anatomy
    • Robot joints, wrists and joint notation
    • Degrees of freedom and robot workspace
    • Robot specifications and work cells
    • Lagrange–Euler dynamics
  2. Unit 2: Building Blocks of a Robot

    8 hours

    DC, servo and stepper motors, their drives and speed and direction control; selecting actuators, direct drives and non-traditional actuators; sensors for localisation, navigation, obstacle avoidance and path planning; a case study for a maze-solving robot and a self-driving car.

    Examined in the 70-mark end-semester paper

    • Stepper, BLDC and servo motors
    • Motor drives: speed and direction control
    • Selecting actuators: direct drives and non-traditional actuators
    • Sensors for localisation, navigation and obstacle avoidance
    • Case study: sensors and actuators for a maze-solving robot and a self-driving car
  3. Unit 3: Robot End-Effectors

    8 hours

    Classification of end-effectors; mechanical, hooking, vacuum, magnetic, electrostatic, multiple and internal and external grippers and grippers for special materials; gripper drive systems, active and passive grippers.

    Examined in the 70-mark end-semester paper

    • End effectors and grippers
    • Gripper drive systems: active and passive grippers
  4. Unit 4: Robot Sensors

    6 hours

    Contact sensors for force, torque, touch, position and velocity; non-contact electro-optical, proximity and range-imaging sensors; robot input/output interfaces, machine intelligence and safety.

    Examined in the 70-mark end-semester paper

    • Contact sensors: force, torque, touch, position and velocity
    • Non-contact sensors: proximity, range and vision
    • Sensor selection and signal conditioning
    • ROS and robot safety
  5. Unit 5: AI and Other Research Trends in Robotics

    6 hours

    Machine learning, AI and expert systems in robotics; tele-robotics and virtual reality, micro- and nano-robots, unmanned vehicles, cognitive and evolutionary robotics, and humanoids.

    Examined in the 70-mark end-semester paper

    • AI in robotics and edge AI
    • Tele-robotics and virtual reality
    • Micro- and nano-robots
    • Aerial, underwater and space robots
    • Cognitive and evolutionary robotics
    • Humanoid robots

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).