RTMNU Final E&TC syllabus

RTMNU · Final Year B.Tech Electronics & Telecommunication Engineering · CBCS

PLC and SCADA

BEETC702PE-T · Elective IV · Semester VII · 4 credits · College 30 + university 70

One of the Elective IV options.

  1. Unit 1: PLC Fundamentals

    6 hours

    The history of the PLC, its modular architecture and components; digital and analog inputs and outputs; PLC programming languages; I/O modules and addressing; programming software and simulation tools.

    Examined in the 70-mark end-semester paper

    • PLC definition and evolution
    • PLC architecture and modules
    • Analog I/O and addressing
    • IEC 61131-3 programming languages
    • PLC programming software and simulation tools
  2. Unit 2: PLC Programming and Troubleshooting

    8 hours

    Writing ladder logic; timers, counters and mathematical operations; the main loop, cycle time and function blocks; troubleshooting, monitoring and modifying programs; PLC networking and communication.

    Examined in the 70-mark end-semester paper

    • Ladder diagram basics
    • PLC timers
    • PLC counters
    • PLC arithmetic instructions and function blocks
    • PLC scan cycle and troubleshooting
  3. Unit 3: SCADA Fundamentals

    8 hours

    SCADA architecture and components; HMI and dashboard design; real-time data acquisition and monitoring; alarm management and event handling; closed loops, manual and auto modes, and closed-loop operation under failure.

    Examined in the 70-mark end-semester paper

    • SCADA architecture
    • HMI design and tag configuration
    • SCADA alarm handling, trending, logging and reports
    • PID control in PLCs
  4. Unit 4: Communication and Networking

    8 hours

    Communication protocols for PLC and SCADA (Modbus, Profibus and others); network architecture and topology; configuring PLC–SCADA communication; remote monitoring and control; Modbus TCP remote I/O.

    Examined in the 70-mark end-semester paper

    • Fieldbus, PROFIBUS and Modbus
    • IIoT protocols: OPC-UA, Modbus and PROFINET
    • Modbus TCP and remote I/O
    • Remote monitoring and control of industrial processes
  5. Unit 5: SCADA Data Acquisition, Operations and Analysis

    6 hours

    Acquiring field data and controlling actuators through the PLC and SCADA; data logging, storage and retrieval; analysing data for process optimisation; trending, reporting and alarms.

    Examined in the 70-mark end-semester paper

    • MTU and RTU
    • HMI and SCADA applications

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).